Hi I wrote before about this. I'm trying to monitor a
remote interface from my workstation. I was using a
crossover cable to test this first. The remote
interface didn't appear in the drop down list, so it
was suggested that I use the rpcap utility but I can't
get it to work right. Thanks for any help you can
give. Here's what's happening:
I tried to use rpcap to capture the packets to and
from the remote nic, but I must be doing something
wrong. I was using the syntax
rpcap://10.11.12.13/adaptername.
What I typed specifically was
rpcapd://172.16.52.212/3Com EtherLink PCI:
\Device\NPF_{C5533B45-4272-4036-8610-369AD6E69036}.
When I did this I got
Press CTRL + C to stop the server...
I also tried
rpcapd://172.16.52.212/3Com EtherLink PCI.
I got the same result. Nothing appears to be
happening. I tried writing the output to a file and
it didn't write the file.
Since these adapter names appeared in the Ethereal
Capture Options Interface drop down list I assumed
that one of these was the name of the adapter; is this
correct or is the adapter name obtained in some other
way?
What else might I be doing wrong?
Thanks for your help.
Jeff
_____________________________________________
From: Silverstein, Jeffrey
Sent: Wednesday, November 03, 2004 12:08 PM
To: 'ethereal-users@xxxxxxxxxxxx'
Subject: can't get ethereal to see another nic in
capture drop down list
Hi, I'm testing out Ethereal on Windows XP by
connecting 2 machines with a crossover cable. I have
installed Ethereal on both machines. When I look at
the list of interfaces in the "Interface:" field in
the dialog box popped up by "Capture->Start", all I
can see is the local interface. When I try to capture
the other interface by entering the IP or the MAC
address, Ethereal gives me an error. This happens no
matter which machine I do this from. What do I need
to do to get both interfaces to appear in the dialog
box?
Thanks,
Jeff
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com