The filter you want might look something like this:
ip host 10.1.2.3 and ip host 10.1.2.4 and tcp port 443
Capture
Interfaces (check the appropriate interface)
Options
{double-click checked interface}
Type the above filter into the 'Capture Filter' box. If the syntax is
correct, the line goes green; if not, it goes red
OK
Start
--sk
On 3/5/2013 5:02 PM, Chris Arnold wrote:
> I know this has probably been asked many times. I have done a google search and have not found my answer. I need to know how to setup wireshark to capture traffic from an ip address to an ip address on port 443. Can someone help me set the options to capture these packets?
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe