Thanks a lot for the info: i decide to insert a hub to simplify my cx -> so that I see all traffic which are broadcasted over any ports.
Still asking who to do if i'm very far from the hostA & B? and connected myself on a remote subnet ? maybe using the remote mirroring ? but for that i need user account to activate mirror session over switches ! ?
Anyhow, thanks all for your help.
Alain AMÉAUME
-----Message d'origine-----
De : wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] De la part de Tim.Poth@xxxxxxxxxxx
Envoyé : vendredi 22 février 2013 15:26
À : wireshark-users@xxxxxxxxxxxxx
Objet : Re: [Wireshark-users] How to use a "wireshark sniffer PC" to capture ftp flows between 2 terminals located on 2 # sub-networks ?
There are lots of options for doing this, you might want to start by looking at this http://wiki.wireshark.org/CaptureSetup/Ethernet#Switched_Ethernet
You could do the route option but that seems to add a lot of complexity and will change your packet flow which may work against why you are capturing in the first place.
Hope that helps
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of AMEAUME, ALAIN (ALAIN)** CTR **
Sent: Friday, February 22, 2013 8:55 AM
To: Community support list for Wireshark
Subject: [Wireshark-users] How to use a "wireshark sniffer PC" to capture ftp flows between 2 terminals located on 2 # sub-networks ?
Hi users,
I'm interesting to know how to insert my PC laptop with wireshark as a" PC sniffer" between 2 terminals to capture ftp flows between them:
terminal "A" in sub-network x.y.A.1
terminal "B" in sub-network x.y.B.1
my PC laptop "C" on sub-network x.y.A.2 or x.y.B.2
using this configuration, I do not need to install wireshark on A & B !
I suppose that on "A" terminal I need to create a route from A.1 to B.1 passing thru "C", the same relatively to "B", then I will need also to declare on my laptop "C" a kind of "gateway" function to re-route the ftp flow, after capture, to its original destination Is it what we call the NAT function on "C": and how to do it on the "C" laptop windows xp sp3 ?
Thanks for your help.
Alain
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe