Wireshark-users: Re: [Wireshark-users] Lost packets can not ping mymachineonmynetwork

From: "ronnie sahlberg" <ronniesahlberg@xxxxxxxxx>
Date: Sat, 14 Oct 2006 04:10:28 +0000
Why would an operating system allow you to disable ICMP?

ICMP has no security issues and IS a vital part of what keeps TCP/IP
working properly.


Allowing users to configure/disable this is as silly as when clueless
firewall admins block all ICMP and then wonder why their users have
problem accessing the network and browsing the internet.


On 10/13/06, Turner, Jay <Jay.Turner@xxxxxxxxxxxxxxxxxx> wrote:
Check that Windows has the Service running that responds to ICMP
packets. What is that? Got me.

If you are running XP then check Control Panel>>Windows
Firewall>>Advanced>>ICMP>>Settings and be sure that everything is set on
that you want.

Thank you,
Jay Turner

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of David Sent: Friday, October 13, 2006 11:35 AM
To: 'Community support list for Wireshark'
Subject: Re: [Wireshark-users] Lost packets can not ping
mymachineonmynetwork

Well I suppose reinstalling :-(( is probably going to be the only way I
can
get a definitive answer to this Network oddity .. Wire shark seems to
suggest that all is fine with regards to send/receive ping requests ..
M1
for what ever reason will not answer the door knock ... But allows file
&
print sharing no problem .. I think I will pass on a reinstall

Must be a Microsoft never to be solved mystery :-))

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Stephen
Fisher
Sent: 13 October 2006 00:44
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] Lost packets can not ping my
machineonmynetwork



Your setup sounds fine and the ping requests are leaving the other
machines AND arriving at M1.  However, M1 chooses not to reply.  I don't

see any reason from a network perspective that this is happening.  If
it's a Windows machine, have you tried reinstalling? :)


Steve

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users