[Teto <mattator@xxxxxxxxx>]

sorry I made a mistake, to correct the problem I had to remove the
",0" after   PRODUCTVERSION @RC_VERSION@ in "plugin.rc.in".

Can't remember how I got this file though, if I copied it from griphon
plugin or if it got generated by python or whatever.



On Tue, Sep 27, 2011 at 4:41 PM, Teto <mattator@xxxxxxxxx> wrote:
>
> I am impressed by the whole environment deployed for dev it's very
> impressive, even documentation is top-notch.
>
> I noticed sthg wrong . In README.plugins, it is said to copy/paste all
> files and modifying them accordingly. If I don't remove the trailing
> ",$(MODULE_VERSION_EXTRA)"
> in "moduleinfo.h" I get an error in windows 7 64 bits.:
> energywise_udp.rc(5) : error RC2167 : unrecognized VERSIONINFO field;  BEGIN or
> comma expected
>
> Is that a known problem ?
>
> Matt
>
> On Mon, Sep 26, 2011 at 3:56 PM, Teto <mattator@xxxxxxxxx> wrote:
> >
> > I could test your solution today. The poor PC took 4 hours to compile
> > everything but it worked. Thanks a lot !!
> >
> > On Fri, Sep 23, 2011 at 12:43 PM, Anders Broman
> > <anders.broman@xxxxxxxxxxxx> wrote:
> > >
> > > Hi,
> > > In config nmake change
> > >
> > > ##### Target platform #####
> > > # Only "win32" and "win64" are valid (for now).
> > > # This can be defined in the system environment.
> > > !IFNDEF WIRESHARK_TARGET_PLATFORM
> > > WIRESHARK_TARGET_PLATFORM=win32
> > > !END
> > >
> > > And read http://wiki.wireshark.org/Development/Win64
> > >
> > > Regards
> > > Anders
> > >
> > > -----Original Message-----
> > > From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Teto
> > > Sent: den 23 september 2011 12:36
> > > To: wireshark-dev@xxxxxxxxxxxxx
> > > Subject: [Wireshark-dev] Problem compiling SVN because of a mismatch 32/64 bits ?
> > >
> > > Hi to all,
> > >
> > > I want to improve energywise support in wireshark, that's why I try to compile wireshark on windows 7 64 bits. I've met various problems I list here for future googlers:
> > >
> > > Makefile.nmake(10) : fatal error U1052: file 'win32.mak' not found => I installed Windows SDK and that solved it NMAKE : fatal error U1077: 'sed' : return code '0x1' => Don't put space " " in VERSION_EXTRA ! this should be added to the superb developer guide:
> > > http://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html#id578236
> > >
> > > Here is my current problem: i've launched a terminal throug cmd /V:ON to enable "delayed variable expansion" as explained here http://social.msdn.microsoft.com/Forums/en/windowssdk/thread/b8f02d5d-a52c-4fa2-8ff1-5b0a0cd60255.
> > > then I call SetEnv.cmd in the windows SDK folder.
> > >
> > > Then I cd c:\wireshark and launch "nmake -f Makefile.nmake all".
> > > Firstly I ran into this problem:
> > > I"'ml': is not recognized as an internal or external command, operable program or batch file"
> > > so I went to C:\Program Files (x86)\Microsoft Visual Studio
> > > 9.0\VC\bin\amd64 and renamed ml64.exe to ml.exe and here comes the
> > > output:
> > >
> > >
> > > =========
> > > ml -c -coff -Zi -DASMV -DASMINF contrib/masmx86\inffas32.asm Microsoft (R) Macro Assembler (x64) Version 9.00.30729.01 Copyright (C) Microsoft Corporation. All rights reserved.
> > >
> > > MASM : warning A4018:invalid command-line option : -coff
> > > Assembling: contrib/masmx86\inffas32.asm
> > > contrib/masmx86\inffas32.asm(64) : error A2008:syntax error : .
> > > contrib/masmx86\inffas32.asm(65) : error A2008:syntax error : .
> > > contrib/masmx86\inffas32.asm(68) : error A2008:syntax error : .
> > > contrib/masmx86\inffas32.asm(167) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(168) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(169) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(170) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(171) : error A2008:syntax error : pushfd
> > > contrib/masmx86\inffas32.asm(279) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(280) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(281) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(282) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(283) : error A2008:syntax error : pushfd
> > > contrib/masmx86\inffas32.asm(290) : error A2008:syntax error : popfd
> > > contrib/masmx86\inffas32.asm(291) : error A2008:syntax error : pushfd
> > > contrib/masmx86\inffas32.asm(292) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(318) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(319) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(320) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(321) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(1075) : error A2008:syntax error : popfd
> > > contrib/masmx86\inffas32.asm(1076) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(1077) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(1078) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(1079) : error A2070:invalid instruction operands
> > > contrib/masmx86\inffas32.asm(710) : error A2022:instruction operands must be the same size
> > > contrib/masmx86\inffas32.asm(751) : error A2022:instruction operands must be the same size
> > > contrib/masmx86\inffas32.asm(810) : error A2022:instruction operands must be the same size
> > > contrib/masmx86\inffas32.asm(823) : error A2022:instruction operands must be the same size =========
> > >
> > > It looks to me that I am trying to build a 32bits version though my SDK is for 64 bits. any idea how to solve that ?
> > >
> > > Thanks for your attention.
> > > Matt
> > > ___________________________________________________________________________
> > > Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> > > Archives:    http://www.wireshark.org/lists/wireshark-dev
> > > Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
> > >             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe