[Teto <mattator@xxxxxxxxx>]

I am impressed by the whole environment deployed for dev it's very
impressive, even documentation is top-notch.

I noticed sthg wrong . In README.plugins, it is said to copy/paste all
files and modifying them accordingly. If I don't remove the trailing
",$(MODULE_VERSION_EXTRA)"
in "moduleinfo.h" I get an error in windows 7 64 bits.:
energywise_udp.rc(5) : error RC2167 : unrecognized VERSIONINFO field;  BEGIN or
comma expected

Is that a known problem ?

Matt

On Mon, Sep 26, 2011 at 3:56 PM, Teto <mattator@xxxxxxxxx> wrote:
>
> I could test your solution today. The poor PC took 4 hours to compile
> everything but it worked. Thanks a lot !!
>
> On Fri, Sep 23, 2011 at 12:43 PM, Anders Broman
> <anders.broman@xxxxxxxxxxxx> wrote:
> >
> > Hi,
> > In config nmake change
> >
> > ##### Target platform #####
> > # Only "win32" and "win64" are valid (for now).
> > # This can be defined in the system environment.
> > !IFNDEF WIRESHARK_TARGET_PLATFORM
> > WIRESHARK_TARGET_PLATFORM=win32
> > !END
> >
> > And read http://wiki.wireshark.org/Development/Win64
> >
> > Regards
> > Anders
> >
> > -----Original Message-----
> > From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Teto
> > Sent: den 23 september 2011 12:36
> > To: wireshark-dev@xxxxxxxxxxxxx
> > Subject: [Wireshark-dev] Problem compiling SVN because of a mismatch 32/64 bits ?
> >
> > Hi to all,
> >
> > I want to improve energywise support in wireshark, that's why I try to compile wireshark on windows 7 64 bits. I've met various problems I list here for future googlers:
> >
> > Makefile.nmake(10) : fatal error U1052: file 'win32.mak' not found => I installed Windows SDK and that solved it NMAKE : fatal error U1077: 'sed' : return code '0x1' => Don't put space " " in VERSION_EXTRA ! this should be added to the superb developer guide:
> > http://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html#id578236
> >
> > Here is my current problem: i've launched a terminal throug cmd /V:ON to enable "delayed variable expansion" as explained here http://social.msdn.microsoft.com/Forums/en/windowssdk/thread/b8f02d5d-a52c-4fa2-8ff1-5b0a0cd60255.
> > then I call SetEnv.cmd in the windows SDK folder.
> >
> > Then I cd c:\wireshark and launch "nmake -f Makefile.nmake all".
> > Firstly I ran into this problem:
> > I"'ml': is not recognized as an internal or external command, operable program or batch file"
> > so I went to C:\Program Files (x86)\Microsoft Visual Studio
> > 9.0\VC\bin\amd64 and renamed ml64.exe to ml.exe and here comes the
> > output:
> >
> >
> > =========
> > ml -c -coff -Zi -DASMV -DASMINF contrib/masmx86\inffas32.asm Microsoft (R) Macro Assembler (x64) Version 9.00.30729.01 Copyright (C) Microsoft Corporation. All rights reserved.
> >
> > MASM : warning A4018:invalid command-line option : -coff
> > Assembling: contrib/masmx86\inffas32.asm
> > contrib/masmx86\inffas32.asm(64) : error A2008:syntax error : .
> > contrib/masmx86\inffas32.asm(65) : error A2008:syntax error : .
> > contrib/masmx86\inffas32.asm(68) : error A2008:syntax error : .
> > contrib/masmx86\inffas32.asm(167) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(168) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(169) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(170) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(171) : error A2008:syntax error : pushfd
> > contrib/masmx86\inffas32.asm(279) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(280) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(281) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(282) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(283) : error A2008:syntax error : pushfd
> > contrib/masmx86\inffas32.asm(290) : error A2008:syntax error : popfd
> > contrib/masmx86\inffas32.asm(291) : error A2008:syntax error : pushfd
> > contrib/masmx86\inffas32.asm(292) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(318) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(319) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(320) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(321) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(1075) : error A2008:syntax error : popfd
> > contrib/masmx86\inffas32.asm(1076) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(1077) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(1078) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(1079) : error A2070:invalid instruction operands
> > contrib/masmx86\inffas32.asm(710) : error A2022:instruction operands must be the same size
> > contrib/masmx86\inffas32.asm(751) : error A2022:instruction operands must be the same size
> > contrib/masmx86\inffas32.asm(810) : error A2022:instruction operands must be the same size
> > contrib/masmx86\inffas32.asm(823) : error A2022:instruction operands must be the same size =========
> >
> > It looks to me that I am trying to build a 32bits version though my SDK is for 64 bits. any idea how to solve that ?
> >
> > Thanks for your attention.
> > Matt
> > ___________________________________________________________________________
> > Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> > Archives:    http://www.wireshark.org/lists/wireshark-dev
> > Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
> >             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe