Wireshark-dev: Re: [Wireshark-dev] [Wireshark-users] Decode As dialog doesn't offer SMB

From: Bill Meier <wmeier@xxxxxxxxxxx>
Date: Sat, 22 Nov 2008 01:08:56 -0500
I was wrong. Using NBSS as the "decode as" does work .... (as Ronnie noted in his reply to John Walsh).
Bill

It does seem to work, but a quick run-thru with the debugger suggests 
that some further analysis is required. Port 445 is certainly 
"hard-wired" in the code ... I'll have to look tomorrow when I'm not 
falling asleep...
Bill