["Douglas Pratley" <Douglas.pratley@xxxxxxxxxx>]

Thanks for getting back to me.

I'll try finding the lua.h file and specifying the directory explicitly
and let you know how I get on. But can I emphasise that "--with-lua" on
its own does build a Lua aware Wireshark that works when doing a normal
"make all". It is only when doing a "make rpm-package" that it does not
seem to work (so Lua is present, and the normal build finds it). I'm not
sure that that was picked up on...

Cheers

Doug 

> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx 
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Luis Ontanon
> Sent: 16 February 2007 17:40
> To: Developer support list for Wireshark
> Subject: Re: [Wireshark-dev] Building RPM with Lua support
> 
> It did not found lua, so it was built without it.
> 
> you should:
> - locate lua.h
> assuming it is in /usr/local/include
> you should then:
> $ ./configure --with-lua=/usr/local --whith-this --with-that 
> check in the report at the end of configure whether lua was 
> included or not.
> 
> please report success or failure.
> 
> If it fails you should send back the output of:
> $ find / -name 'lua.h' -or -name 'liblua.a'
> 
> + the config.log  (gzipped please) so I can find out what's wrong with
> the configure script.
> 
> Thanks,
> Luis
> 
> 
> On 2/16/07, Douglas Pratley <Douglas.pratley@xxxxxxxxxx> wrote:
> >
> >
> >
> > Hi guys
> >
> > I'm having trouble building a Wireshark RPM with Lua support.
> >
> > I really a Windows (ugh) guy, so I may be missing something obvious.
> >
> > I set up a build environment on Fedora Core 6, installed 
> the libraries 
> > for Lua and for ADNS and then said:
> >
> > [my_ws_dir]$ ./autogen.sh
> > [my_ws_dir]$ ./configure --with-lua --with-adns 
> [my_ws_dir]$ make all
> >
> > And Wireshark waas built and supported both ADNS and Lua 
> when running 
> > with ./wireshark
> >
> >
> > So (after some digging around) I said:
> >
> > [my_ws_dir]$ ./make rpm-package
> >
> > And a _lot_ later, there was an RPM.
> >
> > I took the RPM and tried to install it on a different box, and got 
> > told it needed ADNS. This was good, so I installed ADNS, 
> and then it 
> > installed, and ran
> >
> > - and utterly ignored Lua script
> > I installed Lua.i386, and it still ignored it.
> >
> > Anyone know what I might have done wrong? It's baffling me, 
> and as the 
> > RPM package build does a huge copy and clean build every 
> time tweaking 
> > it has eaten my day...
> >
> > Cheers
> >
> > Doug
> >
> >
> >  This message should be regarded as confidential. If you 
> have received 
> > this email in error please notify the sender and destroy it 
> immediately.
> >  Statements of intent shall only become binding when 
> confirmed in hard 
> > copy by an authorised signatory. The contents of this email 
> may relate 
> > to dealings with other companies within the Detica Group 
> plc group of 
> > companies.
> >
> >  Detica Limited is registered in England under No: 1337451.
> >
> >  Registered offices: Surrey Research Park, Guildford, 
> Surrey, GU2 7YP, 
> > England.
> >
> >
> > _______________________________________________
> > Wireshark-dev mailing list
> > Wireshark-dev@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-dev
> >
> >
> 
> 
> --
> This information is top security. When you have read it, 
> destroy yourself.
> -- Marshall McLuhan
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
>