[Andrej Mikus <wireshark-dev@xxxxxxxx>]

Hi,

In the meantime I found Wireshark wishlist and I find my question
related to first topic in dissection section at
http://wiki.wireshark.org/WishList#head-415ef1ebe1134681b1db49769aa1d8bf027db057

Further check in header files reveals much more info compared to README
files. Found that the functionality I was looking for it (partially)
achieved by flag in_error_pkt. Also found information about modification
of info column.

To conclude, the attached patch would be acceptable?

Thanks
Andrej

On Mon, 22.Jan.07 10:37:20 +0100, Andrej Mikus wrote:
> Team,
> 
> While troubleshooting wccp traffic it is very useful that Wireshark
> goes deep into gre redirected packet and pulls the IP address from it.
> It makes it easy to follow tcp stream also when server responses are not
> GRE encapsulated.
> 
> There are however also situations when the IP information from top level
> is interesting (what router redirected the packet to what wccp client)
> and I would like to implement a preference setting to get this kind of
> information.
> 
> Some questions:
> - Where this preference should be most logical to place? (ip, gre, wccp)
> - How to actually implement it? It requires that packet-ip.c when called
>   for second time should not update columns (and fields for display
> filter), but still continues to build tree for detailed display. Is
> there any way to find out if the packet being dissected is raw IP
> packet, or comes from GRE payload?
> 
> I would like to modify the Info column in all cases to indicate that the
> packet is redirected, for example by prepending char '>' to the info,
> regardless of dissector that produced it. Is this feasible? I notice
> that dissectors call col_clear all the time. Is it possible to modify
> the column after packet is completely dissected?
> 
> In next step I am thinking of using '<' to indicate packet returned back
> to router, but at this point still need to work out some protocol
> details.
> 
> Attached is an example of packet I am concerned about. I hope it would
> help to assist. Output I would like to get after my changes is as
> follows:
> 
> With new preference disabled (current operation):
> No.     Time            Source                Destination           Protocol Info
>       1 09:50:26.794117 10.254.127.195        10.254.108.228        DCERPC   > Request: call_id: 1 opnum: 16 ctx_id: 0
> 
> New preference enabled (show top level info in summary for wccp redirected frames)
> No.     Time            Source                Destination           Protocol Info
>       1 09:50:26.794117 10.254.127.194        10.254.214.82         GREWCCP  Redirected frame
> 
> Frame 1 (282 bytes on wire, 282 bytes captured)
> Ethernet II, Src: Cisco_3a:ab:40 (00:0f:35:3a:ab:40), Dst: Ibm_28:99:a8 (00:14:5e:28:99:a8)
> Internet Protocol, Src: 10.254.127.194 (10.254.127.194), Dst: 10.254.214.82 (10.254.214.82)
>     Version: 4
>     Header length: 20 bytes
>     Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
>     Total Length: 268
>     Identification: 0xac83 (44163)
>     Flags: 0x00
>     Fragment offset: 0
>     Time to live: 253
>     Protocol: GRE (0x2f)
>     Header checksum: 0xa42e [correct]
>     Source: 10.254.127.194 (10.254.127.194)
>     Destination: 10.254.214.82 (10.254.214.82)
> Generic Routing Encapsulation (WCCP)
>     Flags and version: 0000
>     Protocol Type: WCCP (0x883e)
>     Redirect header
>         0... .... = Well-known service
>         .0.. .... = Alternative bucket not used
>         Service ID: Unknown (0x59)
>         Primary bucket index: 72
> Internet Protocol, Src: 10.254.127.195 (10.254.127.195), Dst: 10.254.108.228 (10.254.108.228)
>     Version: 4
>     Header length: 20 bytes
>     Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
>     Total Length: 240
>     Identification: 0x9114 (37140)
>     Flags: 0x04 (Don't Fragment)
>     Fragment offset: 0
>     Time to live: 64
>     Protocol: TCP (0x06)
>     Header checksum: 0xa650 [correct]
>     Source: 10.254.127.195 (10.254.127.195)
>     Destination: 10.254.108.228 (10.254.108.228)
> Transmission Control Protocol, Src Port: 1291 (1291), Dst Port: microsoft-ds (445), Seq: 0, Ack: 0, Len: 188
> NetBIOS Session Service
> SMB (Server Message Block Protocol)
> SMB Pipe Protocol
> DCE RPC Request, Fragment: Single, FragLen: 100, Call: 1 Ctx: 0
> 
> Many thanks for your cooperation
> 
> Andrej Mikus


> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev

Attachment: my_patch.gz
Description: application/gunzip