[Andrej Mikus <wireshark-dev@xxxxxxxx>]

Team,

While troubleshooting wccp traffic it is very useful that Wireshark
goes deep into gre redirected packet and pulls the IP address from it.
It makes it easy to follow tcp stream also when server responses are not
GRE encapsulated.

There are however also situations when the IP information from top level
is interesting (what router redirected the packet to what wccp client)
and I would like to implement a preference setting to get this kind of
information.

Some questions:
- Where this preference should be most logical to place? (ip, gre, wccp)
- How to actually implement it? It requires that packet-ip.c when called
  for second time should not update columns (and fields for display
filter), but still continues to build tree for detailed display. Is
there any way to find out if the packet being dissected is raw IP
packet, or comes from GRE payload?

I would like to modify the Info column in all cases to indicate that the
packet is redirected, for example by prepending char '>' to the info,
regardless of dissector that produced it. Is this feasible? I notice
that dissectors call col_clear all the time. Is it possible to modify
the column after packet is completely dissected?

In next step I am thinking of using '<' to indicate packet returned back
to router, but at this point still need to work out some protocol
details.

Attached is an example of packet I am concerned about. I hope it would
help to assist. Output I would like to get after my changes is as
follows:

With new preference disabled (current operation):
No.     Time            Source                Destination           Protocol Info
      1 09:50:26.794117 10.254.127.195        10.254.108.228        DCERPC   > Request: call_id: 1 opnum: 16 ctx_id: 0

New preference enabled (show top level info in summary for wccp redirected frames)
No.     Time            Source                Destination           Protocol Info
      1 09:50:26.794117 10.254.127.194        10.254.214.82         GREWCCP  Redirected frame

Frame 1 (282 bytes on wire, 282 bytes captured)
Ethernet II, Src: Cisco_3a:ab:40 (00:0f:35:3a:ab:40), Dst: Ibm_28:99:a8 (00:14:5e:28:99:a8)
Internet Protocol, Src: 10.254.127.194 (10.254.127.194), Dst: 10.254.214.82 (10.254.214.82)
    Version: 4
    Header length: 20 bytes
    Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
    Total Length: 268
    Identification: 0xac83 (44163)
    Flags: 0x00
    Fragment offset: 0
    Time to live: 253
    Protocol: GRE (0x2f)
    Header checksum: 0xa42e [correct]
    Source: 10.254.127.194 (10.254.127.194)
    Destination: 10.254.214.82 (10.254.214.82)
Generic Routing Encapsulation (WCCP)
    Flags and version: 0000
    Protocol Type: WCCP (0x883e)
    Redirect header
        0... .... = Well-known service
        .0.. .... = Alternative bucket not used
        Service ID: Unknown (0x59)
        Primary bucket index: 72
Internet Protocol, Src: 10.254.127.195 (10.254.127.195), Dst: 10.254.108.228 (10.254.108.228)
    Version: 4
    Header length: 20 bytes
    Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
    Total Length: 240
    Identification: 0x9114 (37140)
    Flags: 0x04 (Don't Fragment)
    Fragment offset: 0
    Time to live: 64
    Protocol: TCP (0x06)
    Header checksum: 0xa650 [correct]
    Source: 10.254.127.195 (10.254.127.195)
    Destination: 10.254.108.228 (10.254.108.228)
Transmission Control Protocol, Src Port: 1291 (1291), Dst Port: microsoft-ds (445), Seq: 0, Ack: 0, Len: 188
NetBIOS Session Service
SMB (Server Message Block Protocol)
SMB Pipe Protocol
DCE RPC Request, Fragment: Single, FragLen: 100, Call: 1 Ctx: 0

Many thanks for your cooperation

Andrej Mikus

Attachment: grepacket.pcap
Description: Binary data