Ethereal-users: RE: [Ethereal-users] "Short Frame: Diameter" Problem
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
Title: Message
Good
morning,
Thanks
a lot. It worked.
I
would like to ask you the following: I am working with a vendor-specific
implementation of Diameter. Some AVP's are specific to this vendor, meaning that
Ethereal does not recognise some of them.
Is
there anyway to "make" ethereal able to decode these vendor-specific AVP's? Can
I contribute to this in some way?
Regards.
JMC
You should also check the following preference
setting:
Edit---->Prefrences---->Protocols---->TCP: Allow subbdisector to reassemble TCP
streams
The checkbox also needs to be checked
in order to get Diameter over TCP to
be reassembled.
----- Original Message -----
Sent: Wednesday, October 27, 2004 5:03
PM
Subject: RE: [Ethereal-users] "Short
Frame: Diameter" Problem
Hi,
In
the Edit->preferences-> open protocols go to Diameter and tick the box
Reassemble Diameter messages...
Best regards
Anders
Hello,
I am using ethereal (version 0.10.7) to analize
some Diameter messages.
However, the messages with
record-type=INTERIM_RECORD are not being completely captured and they are
labeled as "[Short Frame: Diameter]".
I tried to suppress some AVP's from the message
and in that case the frame is being correctly captured. Is this related
with the size of the frame (I am not limiting the packets size when
capturing the traffic)?
I have attached an example. <<TC_1.4.1.1.1.1.eth>>
Does anybody know how to solve
this?
Thanks for any help.
João Correia OPTIMUS TD/EDD/COREIN M
: +351931013599 F
: +351931023599
_______________________________________________ Ethereal-users
mailing
list Ethereal-users@xxxxxxxxxxxx http://www.ethereal.com/mailman/listinfo/ethereal-users
|