["Martin Regner" <martin.regner@xxxxxxxxx>]

Title: "Short Frame: Diameter" Problem

 

You should also check the following preference setting:

 

Edit---->Prefrences---->Protocols---->TCP: Allow subbdisector to reassemble TCP streams 

 

The checkbox also needs to be checked in order to get Diameter over TCP to be reassembled.

 

 

----- Original Message -----

From: Anders Broman (AL/EAB)

To: 'Ethereal user support'

Sent: Wednesday, October 27, 2004 5:03 PM

Subject: RE: [Ethereal-users] "Short Frame: Diameter" Problem

Hi,

In the Edit->preferences-> open protocols go to Diameter and tick the box Reassemble Diameter messages...

 

Best regards

Anders

-----Original Message-----
From: ethereal-users-bounces@xxxxxxxxxxxx [mailto:ethereal-users-bounces@xxxxxxxxxxxx]On Behalf Of João Boto Correia
Sent: den 27 oktober 2004 16:20
To: ethereal-users@xxxxxxxxxxxx
Subject: [Ethereal-users] "Short Frame: Diameter" Problem

Hello,

I am using ethereal (version 0.10.7) to analize some Diameter messages.

However, the messages with record-type=INTERIM_RECORD are not being completely captured and they are labeled as "[Short Frame: Diameter]".

I tried to suppress some AVP's from the message and in that case the frame is being correctly captured. Is this related with the size of the frame (I am not limiting the packets size when capturing the traffic)?

I have attached an example.
<<TC_1.4.1.1.1.1.eth>>
Does anybody know how to solve this?

Thanks for any help.

João Correia
OPTIMUS
TD/EDD/COREIN
M       :       +351931013599
F       :       +351931023599

---

_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users