Ethereal-users: RE: [Ethereal-users] HPUX nettl question

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

From: Jörgen Karlsson P (LN/EAB) <jorgen.p.karlsson@xxxxxxxxxxxx>
Date: Wed, 28 Apr 2004 08:32:29 +0200
Hi
I have tried on both SX25L2 SX25L3 and on only SX25L3.

BR
Jörgen


------------------
root@chac> netfmt -sf tracefile.TRC0

============================= TRACE file Summary =============================

        Node: chac
        HP-UX Version: B.11.00 A    Machine Type: 9000/785

        Total number of messages: 13
        Messages dropped: 0           Data dropped(bytes): 0

        First Message                       Last Message
                Time: 13:57:21.580107           Time: 13:57:25.187374
                Date: 04/27/04                  Date: 04/27/04

        Message distribution:
              Incoming PDU:       6                Outgoing PDU:       7
           Incoming Header:       0             Outgoing Header:       0
                  Loopback:       0                       Error:       0
                 Procedure:       0                       State:       0
                   Logging:       0


        ~~~~~~~~~~~~~Message distribution by Subsystem~~~~~~~~~~~~~

        Subsystem Name: SX25L3               Group Name: LAN/X.25 NETWORKING
              Incoming PDU:       6                Outgoing PDU:       7
           Incoming Header:       0             Outgoing Header:       0
                  Loopback:       0                       Error:       0
                 Procedure:       0                       State:       0
                   Logging:       0

-----------------------------------------------------------

-----Original Message-----
From: ethereal-users-bounces@xxxxxxxxxxxx
[mailto:ethereal-users-bounces@xxxxxxxxxxxx]On Behalf Of Mark C. Brown
Sent: den 27 april 2004 16:43
To: Ethereal user support
Subject: Re: [Ethereal-users] HPUX nettl question


> Hi
>
> When I try to use ethereal and open a captured file by HPUX nettl I get an
> error message saying " Tha capture file is for a network type that
> Ethereal doesn´t support".

That means the nettl record read has a subsystem type Ethereal
(wiretap/nettl.h) doesn't support.  What driver/interface are you tracing?
 Are you using '-e all' or a specific subsystem on your nettl command?

> Could anyone explain what I might be doing wrong. If I understand the docs
> correct it should support it or?

I have been updating nettl support and the upcoming release will support
iether, FDDI (PCI only), and Token Ring interfaces.  Please send the
output from:

  netfmt -sf nettl_file

This will tell us the subsystems contained in the file...

>
> Kind Regards
> Jörgen

Hoping I can help,

Mark

-- 
"If a train station is where a train stops, | Mark C. Brown
 then what's a workstation?" -- D. Huber    |

_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users