[LEGO <luis.ontanon@xxxxxxxxx>]

Jaime,
  I just checked in a fix (13570) that might very well solve your
problem, can you check if it actually does?

Thanks

Luis

On Tue, 1 Mar 2005 17:29:40 -0600 (CST), Jaime Fournier <ober@xxxxxxxxxx> wrote:
> configure --disabled-ethereal
> That's it on all three linux systems
> 
> On Wed, 2 Mar 2005, LEGO wrote:
> 
> > Date: Wed, 2 Mar 2005 00:12:06 +0100
> > From: LEGO <luis.ontanon@xxxxxxxxx>
> > To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> >     protocolinfo_init() sigsev11
> >
> > Can you tell me the configure options you are using?
> >
> > $ head config.log
> >
> > Thanks
> >
> > On Wed, 2 Mar 2005 00:11:15 +0100, LEGO <luis.ontanon@xxxxxxxxx> wrote:
> >> That's mine!
> >> I'll be looking at it soon.
> >>
> >> On Tue, 1 Mar 2005 16:54:32 -0600 (CST), Jaime Fournier <ober@xxxxxxxxxx> wrote:
> >>> And the change that broke was 13469.
> >>> I investigating to find out why.
> >>>
> >>> On Tue, 1 Mar 2005, Jaime Fournier wrote:
> >>>
> >>>> Date: Tue, 1 Mar 2005 16:07:31 -0600 (CST)
> >>>> From: Jaime Fournier <ober@xxxxxxxxxx>
> >>>> Reply-To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> >>>> To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> >>>> Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> >>>>     protocolinfo_init() sigsev11
> >>>>
> >>>> So far I have been unable to reproduce the problem on anything earlier than
> >>>> revision 13346. I will keep advancing till I can find what change broke it
> >>>> for me.
> >>>>
> >>>>
> >>>> On Tue, 1 Mar 2005, Jaime Fournier wrote:
> >>>>
> >>>>> Date: Tue, 1 Mar 2005 11:01:10 -0600 (CST)
> >>>>> From: Jaime Fournier <ober@xxxxxxxxxx>
> >>>>> Reply-To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> >>>>> To: LEGO <luis.ontanon@xxxxxxxxx>,
> >>>>>     Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> >>>>> Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> >>>>>     protocolinfo_init() sigsev11
> >>>>>
> >>>>> OK, I have tested this on three different linux systems with the latest svn
> >>>>> and I get the same thing on all of them.
> >>>>>
> >>>>> Each was run with configure --disable-ethereal
> >>>>>
> >>>>> Not sure if that could be causing some problems or not.
> >>>>> For some reason the optarg is null.
> >>>>> I will check it out futher after lunch.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> Box2:
> >>>>> Starting program: /usr/local/bin/tethereal -z
> >>>>> proto,colinfo,nfs.fh.hash,nfs.fh.hash
> >>>>>
> >>>>> Program received signal SIGSEGV, Segmentation fault.
> >>>>> 0x08058599 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>> 98              if(!strncmp("proto,colinfo,",optarg,14)){
> >>>>> (gdb) bt full
> >>>>> #0  0x08058599 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>>        rs = (pci_t *) 0x0
> >>>>>        field = 0x0
> >>>>>        filter = 0x0
> >>>>>        hfi = (header_field_info *) 0x8062b88
> >>>>>        error_string = (GString *) 0x8062b88
> >>>>> #1  0x0805cc9d in main (argc=3, argv=0xbffff254) at tethereal.c:1244
> >>>>>        opt = 136005728
> >>>>>        i = 1
> >>>>>        arg_error = 0
> >>>>>        gpf_path = 0x0
> >>>>>        pf_path = 0x0
> >>>>>        gdp_path = 0x0
> >>>>>        dp_path = 0x0
> >>>>>        gpf_open_errno = 134526401
> >>>>>        gpf_read_errno = -1219940672
> >>>>>        pf_open_errno = 0
> >>>>>        pf_read_errno = 0
> >>>>>        gdp_open_errno = 0
> >>>>>        gdp_read_errno = 0
> >>>>>        dp_open_errno = 0
> >>>>>        dp_read_errno = -1208000135
> >>>>>        err = 0
> >>>>>        if_list = (GList *) 0x0
> >>>>>        if_entry = (GList *) 0x0
> >>>>>        if_info = (if_info_t *) 0x1
> >>>>>        adapter_index = 1
> >>>>>        p = 0x0
> >>>>>        err_str = "\032\t\037,\200\004\b\000\000\000\000\000\000\000\000 ",
> >>>>> '\0' <repeats 11 times>,
> >>>>> "\037,+C+\000;\f\000\000\000\f;`;\a\000\000\000\000\0000\v\000\036r\004\b\216w\001\234\004\b\214\n\000\n\000\000\000`;\001\000\000\000\000\000\000\000\001",
> >>>>> '\0' <repeats 11 times>, "\214", '\0' <repeats 16 times>,
> >>>>> "\216w\001\000\220\t\000r\004\b\000\000\000\000\000\000\000\000D+\000;\000\000\000\000\0020\210;,;Tc,\210;"...
> >>>>>        cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of bounds>
> >>>>>        list_link_layer_types = 0
> >>>>>        quiet = 0
> >>>>>        save_file = (gchar *) 0x0
> >>>>>        out_file_type = 2
> >>>>>        cf_name = (gchar *) 0x0
> >>>>>        rfilter = (gchar *) 0x0
> >>>>>        start_capture = 0
> >>>>>        lt_list = (GList *) 0x0
> >>>>>        lt_entry = (GList *) 0x1
> >>>>>        data_link_info = (data_link_info_t *) 0x1
> >>>>>        fcode = {bf_len = 0, bf_insns = 0x0}
> >>>>>        rfcode = (dfilter_t *) 0x0
> >>>>>        prefs = (e_prefs *) 0x80674f8
> >>>>>        badopt = 0 '\0'
> >>>>>        tli = (ethereal_tap_list *) 0x81b4860
> >>>>>        got_tap = 1
> >>>>> Box3:
> >>>>> #0  0x080585b9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>> 98              if(!strncmp("proto,colinfo,",optarg,14)){
> >>>>> (gdb) bt full
> >>>>> #0  0x080585b9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>>        rs = (pci_t *) 0x0
> >>>>>        field = 0x0
> >>>>>        filter = 0x0
> >>>>>        hfi = (header_field_info *) 0x8063354
> >>>>>        error_string = (GString *) 0x8063354
> >>>>> #1  0x0805ccbd in main (argc=3, argv=0x5ea43924) at tethereal.c:1244
> >>>>>        opt = 136057384
> >>>>>        i = 1
> >>>>>        arg_error = 0
> >>>>>        gpf_path = 0x0
> >>>>>        pf_path = 0x0
> >>>>>        gdp_path = 0x0
> >>>>>        dp_path = 0x0
> >>>>>        gpf_open_errno = 608665893
> >>>>>        gpf_read_errno = 134526401
> >>>>>        pf_open_errno = 608714640
> >>>>>        pf_read_errno = 0
> >>>>>        gdp_open_errno = 0
> >>>>>        gdp_read_errno = 0
> >>>>>        dp_open_errno = 0
> >>>>>        dp_read_errno = 0
> >>>>>        err = 0
> >>>>>        if_list = (GList *) 0x0
> >>>>>        if_entry = (GList *) 0x0
> >>>>>        if_info = (if_info_t *) 0x1
> >>>>>        adapter_index = 1
> >>>>>        p = 0x0
> >>>>>        err_str = "7^#:G$A\020%\200\004\b\000\000\000\000\000\000\000\000 ",
> >>>>> '\0' <repeats 11 times>,
> >>>>> "\004\020%\034\020%L#\020%p\016%\f\000\000\000|\016%\016%\220?H$0EH$\000\000\000\0008^=G$r\004\b\216w\001\234\004\b\\8^DH$\n\000\000\000\016%\001\000\000\000\000\000\000\000\001\000\000\000\000\000\000\000\\8^",
> >>>>> '\0' <repeats 16 times>,
> >>>>> "\216w\0018^\220CH$r\004\b\000\000\000\000\000\000\000\000|\234\020%p\016%&:^\222\025%
> >>>>> %, %\2048^@\021% "...
> >>>>>        cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of bounds>
> >>>>>        list_link_layer_types = 0
> >>>>>        quiet = 0
> >>>>>        save_file = (gchar *) 0x0
> >>>>>        out_file_type = 2
> >>>>>        cf_name = (gchar *) 0x0
> >>>>>        rfilter = (gchar *) 0x0
> >>>>>        start_capture = 0
> >>>>>        lt_list = (GList *) 0x0
> >>>>>        lt_entry = (GList *) 0x1
> >>>>>        data_link_info = (data_link_info_t *) 0x1
> >>>>>        fcode = {bf_len = 0, bf_insns = 0x0}
> >>>>>        rfcode = (dfilter_t *) 0x0
> >>>>>        prefs = (e_prefs *) 0x80684f8
> >>>>>        badopt = 0 '\0'
> >>>>>        tli = (ethereal_tap_list *) 0x81c1228
> >>>>>        got_tap = 1
> >>>>> (gdb)
> >>>>>
> >>>>> On Tue, 1 Mar 2005, LEGO wrote:
> >>>>>
> >>>>>> Date: Tue, 1 Mar 2005 14:54:02 +0100
> >>>>>> From: LEGO <luis.ontanon@xxxxxxxxx>
> >>>>>> To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> >>>>>> Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> >>>>>>     protocolinfo_init() sigsev11
> >>>>>>
> >>>>>> I cannot make it happen on my sytstem.
> >>>>>>
> >>>>>> L
> >>>>>>
> >>>>>> On Tue, 1 Mar 2005 01:35:11 -0600 (CST), Jaime Fournier <ober@xxxxxxxxxx>
> >>>>>> wrote:
> >>>>>>> I was testing from the latest svn, and I end up getting a segmentation
> >>>>>>> violation anytime I try to use tethereal with the -z
> >>>>>>> "proto,colinfo,$var,$var" line.
> >>>>>>> In this case I just run
> >>>>>>> tethereal -r TRACEfile -z "proto,colinfo,dcerpc.time,dcerpc.time"
> >>>>>>>
> >>>>>>> Program received signal SIGSEGV, Segmentation fault.
> >>>>>>> [Switching to Thread 16384 (LWP 30884)]
> >>>>>>> 0x080585c9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>>>> 98              if(!strncmp("proto,colinfo,",optarg,14)){
> >>>>>>> (gdb) bt full
> >>>>>>> #0  0x080585c9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> >>>>>>>          rs = (pci_t *) 0x0
> >>>>>>>          field = 0x0
> >>>>>>>          filter = 0x0
> >>>>>>>          hfi = (header_field_info *) 0x8063354
> >>>>>>>          error_string = (GString *) 0x8063354
> >>>>>>> #1  0x0805cccd in main (argc=3, argv=0xbffff464) at tethereal.c:1244
> >>>>>>>          opt = 136008984
> >>>>>>>          i = 1
> >>>>>>>          arg_error = 0
> >>>>>>>          gpf_path = 0x0
> >>>>>>>          pf_path = 0x0
> >>>>>>>          gdp_path = 0x0
> >>>>>>>          dp_path = 0x0
> >>>>>>>          gpf_open_errno = 134526442
> >>>>>>>          gpf_read_errno = 1086609832
> >>>>>>>          pf_open_errno = 0
> >>>>>>>          pf_read_errno = 0
> >>>>>>>          gdp_open_errno = 0
> >>>>>>>          gdp_read_errno = 0
> >>>>>>>          dp_open_errno = 0
> >>>>>>>          dp_read_errno = 1073791177
> >>>>>>>          err = 0
> >>>>>>>          if_list = (GList *) 0x0
> >>>>>>>          if_entry = (GList *) 0x40ced3d4
> >>>>>>>          if_info = (if_info_t *) 0x1
> >>>>>>>          adapter_index = 1
> >>>>>>>          p = 0x0
> >>>>>>>          err_str = "Fz\000@i@|\004\b\000\000\000\000\000\000\000\000 ",
> >>>>>>> '\0' <repeats 11 times>,
> >>>>>>> ",@D]@@Y@\r\000\000\000\030^@p^@\004g\001@\000\000\000\000pj\001@}\000@\202\004\b\216w\001\234\004\b\234
> >>>>>>> j\001@\v\000\000\000p^@\001\000\000\000\000\000\000\000\001", '\0'
> >>>>>>> <repeats 11 times>, "\234", '\0' <repeats 16 times>,
> >>>>>>> "\216w\001\020h\001@\202\004\b\000\000\000\000\000\000\000\000O@Y@\000\000\000\000\000\000\000\0009@\000\000\000\0009-@\204{@
> >>>>>>> ?@"...
> >>>>>>>          cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of
> >>>>>>> bounds>
> >>>>>>>          list_link_layer_types = 0
> >>>>>>>          quiet = 0
> >>>>>>>          save_file = (gchar *) 0x0
> >>>>>>>          out_file_type = 2
> >>>>>>>          cf_name = (gchar *) 0x0
> >>>>>>>          rfilter = (gchar *) 0x0
> >>>>>>>          start_capture = 0
> >>>>>>>          lt_list = (GList *) 0x0
> >>>>>>>          lt_entry = (GList *) 0x1
> >>>>>>>          data_link_info = (data_link_info_t *) 0x1
> >>>>>>>          fcode = {bf_len = 1, bf_insns = 0x0}
> >>>>>>>          rfcode = (dfilter_t *) 0x0
> >>>>>>>          prefs = (e_prefs *) 0x80684f8
> >>>>>>>          badopt = 0 '\0'
> >>>>>>>          tli = (ethereal_tap_list *) 0x81b5518
> >>>>>>>          got_tap = 1
> >>>>>>> (gdb)
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Ethereal-dev mailing list
> >>>>>>> Ethereal-dev@xxxxxxxxxxxx
> >>>>>>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> This information is top security. When you have read it, destroy yourself.
> >>>>>> -- Marshall McLuhan
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Ethereal-dev mailing list
> >>>>>> Ethereal-dev@xxxxxxxxxxxx
> >>>>>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Ethereal-dev mailing list
> >>>>> Ethereal-dev@xxxxxxxxxxxx
> >>>>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> Ethereal-dev mailing list
> >>>> Ethereal-dev@xxxxxxxxxxxx
> >>>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>>>
> >>>
> >>> _______________________________________________
> >>> Ethereal-dev mailing list
> >>> Ethereal-dev@xxxxxxxxxxxx
> >>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >>>
> >>
> >> --
> >> This information is top security. When you have read it, destroy yourself.
> >> -- Marshall McLuhan
> >>
> >
> >
> > --
> > This information is top security. When you have read it, destroy yourself.
> > -- Marshall McLuhan
> >
> > _______________________________________________
> > Ethereal-dev mailing list
> > Ethereal-dev@xxxxxxxxxxxx
> > http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >
> 


-- 
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan