Ethereal-dev: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() si
Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.
From: LEGO <luis.ontanon@xxxxxxxxx>
Date: Wed, 2 Mar 2005 00:12:06 +0100
Can you tell me the configure options you are using?
$ head config.log
Thanks
On Wed, 2 Mar 2005 00:11:15 +0100, LEGO <luis.ontanon@xxxxxxxxx> wrote:
> That's mine!
> I'll be looking at it soon.
>
> On Tue, 1 Mar 2005 16:54:32 -0600 (CST), Jaime Fournier <ober@xxxxxxxxxx> wrote:
> > And the change that broke was 13469.
> > I investigating to find out why.
> >
> > On Tue, 1 Mar 2005, Jaime Fournier wrote:
> >
> > > Date: Tue, 1 Mar 2005 16:07:31 -0600 (CST)
> > > From: Jaime Fournier <ober@xxxxxxxxxx>
> > > Reply-To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > > To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > > Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> > > protocolinfo_init() sigsev11
> > >
> > > So far I have been unable to reproduce the problem on anything earlier than
> > > revision 13346. I will keep advancing till I can find what change broke it
> > > for me.
> > >
> > >
> > > On Tue, 1 Mar 2005, Jaime Fournier wrote:
> > >
> > >> Date: Tue, 1 Mar 2005 11:01:10 -0600 (CST)
> > >> From: Jaime Fournier <ober@xxxxxxxxxx>
> > >> Reply-To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > >> To: LEGO <luis.ontanon@xxxxxxxxx>,
> > >> Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > >> Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> > >> protocolinfo_init() sigsev11
> > >>
> > >> OK, I have tested this on three different linux systems with the latest svn
> > >> and I get the same thing on all of them.
> > >>
> > >> Each was run with configure --disable-ethereal
> > >>
> > >> Not sure if that could be causing some problems or not.
> > >> For some reason the optarg is null.
> > >> I will check it out futher after lunch.
> > >>
> > >>
> > >>
> > >>
> > >> Box2:
> > >> Starting program: /usr/local/bin/tethereal -z
> > >> proto,colinfo,nfs.fh.hash,nfs.fh.hash
> > >>
> > >> Program received signal SIGSEGV, Segmentation fault.
> > >> 0x08058599 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >> 98 if(!strncmp("proto,colinfo,",optarg,14)){
> > >> (gdb) bt full
> > >> #0 0x08058599 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >> rs = (pci_t *) 0x0
> > >> field = 0x0
> > >> filter = 0x0
> > >> hfi = (header_field_info *) 0x8062b88
> > >> error_string = (GString *) 0x8062b88
> > >> #1 0x0805cc9d in main (argc=3, argv=0xbffff254) at tethereal.c:1244
> > >> opt = 136005728
> > >> i = 1
> > >> arg_error = 0
> > >> gpf_path = 0x0
> > >> pf_path = 0x0
> > >> gdp_path = 0x0
> > >> dp_path = 0x0
> > >> gpf_open_errno = 134526401
> > >> gpf_read_errno = -1219940672
> > >> pf_open_errno = 0
> > >> pf_read_errno = 0
> > >> gdp_open_errno = 0
> > >> gdp_read_errno = 0
> > >> dp_open_errno = 0
> > >> dp_read_errno = -1208000135
> > >> err = 0
> > >> if_list = (GList *) 0x0
> > >> if_entry = (GList *) 0x0
> > >> if_info = (if_info_t *) 0x1
> > >> adapter_index = 1
> > >> p = 0x0
> > >> err_str = "\032\t\037,\200\004\b\000\000\000\000\000\000\000\000 ",
> > >> '\0' <repeats 11 times>,
> > >> "\037,+C+\000;\f\000\000\000\f;`;\a\000\000\000\000\0000\v\000\036r\004\b\216w\001\234\004\b\214\n\000\n\000\000\000`;\001\000\000\000\000\000\000\000\001",
> > >> '\0' <repeats 11 times>, "\214", '\0' <repeats 16 times>,
> > >> "\216w\001\000\220\t\000r\004\b\000\000\000\000\000\000\000\000D+\000;\000\000\000\000\0020\210;,;Tc,\210;"...
> > >> cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of bounds>
> > >> list_link_layer_types = 0
> > >> quiet = 0
> > >> save_file = (gchar *) 0x0
> > >> out_file_type = 2
> > >> cf_name = (gchar *) 0x0
> > >> rfilter = (gchar *) 0x0
> > >> start_capture = 0
> > >> lt_list = (GList *) 0x0
> > >> lt_entry = (GList *) 0x1
> > >> data_link_info = (data_link_info_t *) 0x1
> > >> fcode = {bf_len = 0, bf_insns = 0x0}
> > >> rfcode = (dfilter_t *) 0x0
> > >> prefs = (e_prefs *) 0x80674f8
> > >> badopt = 0 '\0'
> > >> tli = (ethereal_tap_list *) 0x81b4860
> > >> got_tap = 1
> > >> Box3:
> > >> #0 0x080585b9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >> 98 if(!strncmp("proto,colinfo,",optarg,14)){
> > >> (gdb) bt full
> > >> #0 0x080585b9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >> rs = (pci_t *) 0x0
> > >> field = 0x0
> > >> filter = 0x0
> > >> hfi = (header_field_info *) 0x8063354
> > >> error_string = (GString *) 0x8063354
> > >> #1 0x0805ccbd in main (argc=3, argv=0x5ea43924) at tethereal.c:1244
> > >> opt = 136057384
> > >> i = 1
> > >> arg_error = 0
> > >> gpf_path = 0x0
> > >> pf_path = 0x0
> > >> gdp_path = 0x0
> > >> dp_path = 0x0
> > >> gpf_open_errno = 608665893
> > >> gpf_read_errno = 134526401
> > >> pf_open_errno = 608714640
> > >> pf_read_errno = 0
> > >> gdp_open_errno = 0
> > >> gdp_read_errno = 0
> > >> dp_open_errno = 0
> > >> dp_read_errno = 0
> > >> err = 0
> > >> if_list = (GList *) 0x0
> > >> if_entry = (GList *) 0x0
> > >> if_info = (if_info_t *) 0x1
> > >> adapter_index = 1
> > >> p = 0x0
> > >> err_str = "7^#:G$A\020%\200\004\b\000\000\000\000\000\000\000\000 ",
> > >> '\0' <repeats 11 times>,
> > >> "\004\020%\034\020%L#\020%p\016%\f\000\000\000|\016%\016%\220?H$0EH$\000\000\000\0008^=G$r\004\b\216w\001\234\004\b\\8^DH$\n\000\000\000\016%\001\000\000\000\000\000\000\000\001\000\000\000\000\000\000\000\\8^",
> > >> '\0' <repeats 16 times>,
> > >> "\216w\0018^\220CH$r\004\b\000\000\000\000\000\000\000\000|\234\020%p\016%&:^\222\025%
> > >> %, %\2048^@\021% "...
> > >> cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of bounds>
> > >> list_link_layer_types = 0
> > >> quiet = 0
> > >> save_file = (gchar *) 0x0
> > >> out_file_type = 2
> > >> cf_name = (gchar *) 0x0
> > >> rfilter = (gchar *) 0x0
> > >> start_capture = 0
> > >> lt_list = (GList *) 0x0
> > >> lt_entry = (GList *) 0x1
> > >> data_link_info = (data_link_info_t *) 0x1
> > >> fcode = {bf_len = 0, bf_insns = 0x0}
> > >> rfcode = (dfilter_t *) 0x0
> > >> prefs = (e_prefs *) 0x80684f8
> > >> badopt = 0 '\0'
> > >> tli = (ethereal_tap_list *) 0x81c1228
> > >> got_tap = 1
> > >> (gdb)
> > >>
> > >> On Tue, 1 Mar 2005, LEGO wrote:
> > >>
> > >>> Date: Tue, 1 Mar 2005 14:54:02 +0100
> > >>> From: LEGO <luis.ontanon@xxxxxxxxx>
> > >>> To: Ethereal development <ethereal-dev@xxxxxxxxxxxx>
> > >>> Subject: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo
> > >>> protocolinfo_init() sigsev11
> > >>>
> > >>> I cannot make it happen on my sytstem.
> > >>>
> > >>> L
> > >>>
> > >>> On Tue, 1 Mar 2005 01:35:11 -0600 (CST), Jaime Fournier <ober@xxxxxxxxxx>
> > >>> wrote:
> > >>>> I was testing from the latest svn, and I end up getting a segmentation
> > >>>> violation anytime I try to use tethereal with the -z
> > >>>> "proto,colinfo,$var,$var" line.
> > >>>> In this case I just run
> > >>>> tethereal -r TRACEfile -z "proto,colinfo,dcerpc.time,dcerpc.time"
> > >>>>
> > >>>> Program received signal SIGSEGV, Segmentation fault.
> > >>>> [Switching to Thread 16384 (LWP 30884)]
> > >>>> 0x080585c9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >>>> 98 if(!strncmp("proto,colinfo,",optarg,14)){
> > >>>> (gdb) bt full
> > >>>> #0 0x080585c9 in protocolinfo_init (optarg=0x0) at tap-protocolinfo.c:98
> > >>>> rs = (pci_t *) 0x0
> > >>>> field = 0x0
> > >>>> filter = 0x0
> > >>>> hfi = (header_field_info *) 0x8063354
> > >>>> error_string = (GString *) 0x8063354
> > >>>> #1 0x0805cccd in main (argc=3, argv=0xbffff464) at tethereal.c:1244
> > >>>> opt = 136008984
> > >>>> i = 1
> > >>>> arg_error = 0
> > >>>> gpf_path = 0x0
> > >>>> pf_path = 0x0
> > >>>> gdp_path = 0x0
> > >>>> dp_path = 0x0
> > >>>> gpf_open_errno = 134526442
> > >>>> gpf_read_errno = 1086609832
> > >>>> pf_open_errno = 0
> > >>>> pf_read_errno = 0
> > >>>> gdp_open_errno = 0
> > >>>> gdp_read_errno = 0
> > >>>> dp_open_errno = 0
> > >>>> dp_read_errno = 1073791177
> > >>>> err = 0
> > >>>> if_list = (GList *) 0x0
> > >>>> if_entry = (GList *) 0x40ced3d4
> > >>>> if_info = (if_info_t *) 0x1
> > >>>> adapter_index = 1
> > >>>> p = 0x0
> > >>>> err_str = "Fz\000@i@|\004\b\000\000\000\000\000\000\000\000 ",
> > >>>> '\0' <repeats 11 times>,
> > >>>> ",@D]@@Y@\r\000\000\000\030^@p^@\004g\001@\000\000\000\000pj\001@}\000@\202\004\b\216w\001\234\004\b\234
> > >>>> j\001@\v\000\000\000p^@\001\000\000\000\000\000\000\000\001", '\0'
> > >>>> <repeats 11 times>, "\234", '\0' <repeats 16 times>,
> > >>>> "\216w\001\020h\001@\202\004\b\000\000\000\000\000\000\000\000O@Y@\000\000\000\000\000\000\000\0009@\000\000\000\0009-@\204{@
> > >>>> ?@"...
> > >>>> cant_get_if_list_errstr = (gchar *) 0x1 <Address 0x1 out of
> > >>>> bounds>
> > >>>> list_link_layer_types = 0
> > >>>> quiet = 0
> > >>>> save_file = (gchar *) 0x0
> > >>>> out_file_type = 2
> > >>>> cf_name = (gchar *) 0x0
> > >>>> rfilter = (gchar *) 0x0
> > >>>> start_capture = 0
> > >>>> lt_list = (GList *) 0x0
> > >>>> lt_entry = (GList *) 0x1
> > >>>> data_link_info = (data_link_info_t *) 0x1
> > >>>> fcode = {bf_len = 1, bf_insns = 0x0}
> > >>>> rfcode = (dfilter_t *) 0x0
> > >>>> prefs = (e_prefs *) 0x80684f8
> > >>>> badopt = 0 '\0'
> > >>>> tli = (ethereal_tap_list *) 0x81b5518
> > >>>> got_tap = 1
> > >>>> (gdb)
> > >>>>
> > >>>> _______________________________________________
> > >>>> Ethereal-dev mailing list
> > >>>> Ethereal-dev@xxxxxxxxxxxx
> > >>>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > >>>>
> > >>>
> > >>>
> > >>> --
> > >>> This information is top security. When you have read it, destroy yourself.
> > >>> -- Marshall McLuhan
> > >>>
> > >>> _______________________________________________
> > >>> Ethereal-dev mailing list
> > >>> Ethereal-dev@xxxxxxxxxxxx
> > >>> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > >>>
> > >>
> > >> _______________________________________________
> > >> Ethereal-dev mailing list
> > >> Ethereal-dev@xxxxxxxxxxxx
> > >> http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > >>
> > >
> > > _______________________________________________
> > > Ethereal-dev mailing list
> > > Ethereal-dev@xxxxxxxxxxxx
> > > http://www.ethereal.com/mailman/listinfo/ethereal-dev
> > >
> >
> > _______________________________________________
> > Ethereal-dev mailing list
> > Ethereal-dev@xxxxxxxxxxxx
> > http://www.ethereal.com/mailman/listinfo/ethereal-dev
> >
>
> --
> This information is top security. When you have read it, destroy yourself.
> -- Marshall McLuhan
>
--
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan
- Follow-Ups:
- References:
- [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: Jaime Fournier
- Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: LEGO
- Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: Jaime Fournier
- Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: Jaime Fournier
- Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: Jaime Fournier
- Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- From: LEGO
- [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- Prev by Date: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- Next by Date: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- Previous by thread: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- Next by thread: Re: [Ethereal-dev] Crash in latest svn: tethereal colinfo protocolinfo_init() sigsev11
- Index(es):