Yes, a sample dump would be helpful as I cannot reproduce it on my
machine using your filter below.
Regards,
Jon Oberheide
jon@xxxxxxxxxxxxx
On Thu, 2004-04-29 at 12:36, Falk Hayn wrote:
> Jon,
>
> it looks, that it is not depended on the traffic ethereal sees.
> I do only a broadcast analysis with filter
> not ip host <my ip>
>
> Ethereal 0.9.16 and 0.10.3 seee the same traffic.
> Only Ethereal 0.10.3 crashes.
>
> Do You still want a sample tracefile ?
>
>
>
> > Can you provide a sample dump that reproduces the crash?
> >
> > Regards,
> > Jon Oberheide
> > jon@xxxxxxxxxxxxx
> >
> >
> > On Thu, 2004-04-29 at 06:38, Falk Hayn wrote:
> > > Dear ladies and Sirs,
> > >
> > > ethereal 0.9.16 works fine with HPX-UX 11.11 in my enviroment.
> > >
> > > ethereal 0.10.3 core dumps under HPX-UX 11.11 when it starts to decode
> > > packets.
> > >
> > >
> > > ethereal 0.10.3 error messages:
> > > ==============================
> > > ** ERROR **: file proto.c: line 1153 (proto_tree_add_ipv4):
> > > assertion failed: (hfinfo->type == FT_IPv4)
> > > aborting...
> > > ethereal: 24021 Abort(coredump)
> > >
> > >
> > > libraries versions
> > > ==================
> > > all libs are used with ethereal 0.9.16 and ethereal 0.10.3 without any
> > > changes
> > > GTK 1.2.10
> > > TCPDUMP 0.8.3
> > > ADNS 1.1
> > > UCD SNMP 4.2.6
> > > PCRE 4.5
> > >
> > >
> > > gdb backtrace session
> > > =====================
> > > gdb /usr/local/bin/gethereal core
> > > GNU gdb 6.1
> > > .... ... ...
> > > This GDB was configured as "hppa2.0w-hp-hpux11.11"...
> > > Core was generated by `gethereal'.
> > > Program terminated with signal 6, Aborted.
> > >
> > > warning: Couldn't read general-purpose registers from `.reg' section in
> > core
> > > file.
> > >
> > > warning: The shared libraries were not privately mapped; setting a
> > > breakpoint in a shared library will not work until you rerun the
> > program.
> > >
> > > Debugging dynamic executables loaded via the hpux8 dld.sl is not
> > supported.
> > >
> > > warning: Couldn't read general-purpose registers from `.reg' section in
> > core
> > > file.
> > >
> > > #0 0x00000000 in ?? ()
> > > (gdb) backtrace
> > > #0 0x00000000 in ?? ()
> > > (gdb) Quit
> > > (gdb)
> > >
> > >
> > > gcc version:
> > > ==============
> > > gcc -v
> > > Reading specs from
> > /usr/local/lib/gcc-lib/hppa2.0w-hp-hpux11.11/3.3.3/specs
> > > Configured with: ../gcc-3.3.3/configure --with-gnu-as
> > > --enable-languages=c,c++,objc
> > > Thread model: single
> > > gcc version 3.3.3
> > >
> > >
> > > machine:
> > > ========
> > > J2240, 2 Processors, 512 MB RAM, 1 Gig Swap.
> > >
> > >
> > >
> > > Can pls. someone give me advices, how to proceed ?
> > >
> > >
> > > Do not hesitate to contact me via falk.hayn@xxxxxx if You have further
> > > questions.
> > >
> > > With kindly regards
> > > Falk.
> > >
> >
Attachment:
signature.asc
Description: This is a digitally signed message part