with https://github.com/teto/mptcpanalyzer and 1 pcap captured at both
end, you can plot the one-way-delays and see losses but only for
(MP)TCP connections for now.
I developed it because I wasn't able to find what you suggested. You
may be able to modify the code to support your protocol.
Le mar. 29 sept. 2020 à 16:36, chuck c <bubbasnmp@xxxxxxxxx> a écrit :
>
> You might try asking this on the Q&A site - https://ask.wireshark.org/questions/ - and include VOIP or RTP in the title.
>
> On Tue, Sep 29, 2020 at 2:44 AM Hugo van der Kooij via Wireshark-users <wireshark-users@xxxxxxxxxxxxx> wrote:
>>
>> Hi,
>>
>>
>>
>> Is there a better way to check latency and packetloss then doing a hard manual compare?
>>
>>
>>
>> I have 2 PCAP files taken on both ends of SDWAN link that we suspect is absolutely not doing a good job. We used the filter on 2 specific subnets while doing a telephone call . So we have the data and looking at the seperately it seems the SDWAN link is not doing well.
>>
>>
>>
>> But I was hoping for a better and smarter way to determine packet loss and latency based on a set of PCAP files taken on both ends.
>>
>>
>>
>> Anyone has better or smarter way to point more definitively to how bad it realy is?
>>
>>
>>
>> Regards, Hugo.
>>
>> ___________________________________________________________________________
>> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
>> Archives: https://www.wireshark.org/lists/wireshark-users
>> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
>> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
>
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: https://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe