Wireshark-users: [Wireshark-users] Wireshark 1.99.9 is now available
From: Gerald Combs <gerald@xxxxxxxxxxxxx>
Date: Wed, 2 Sep 2015 11:10:07 -0700
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm proud to announce the release of Wireshark 1.99.9.
This is a semi-experimental release intended to test new features for
Wireshark 2.0.
__________________________________________________________________
What is Wireshark?
Wireshark is the world's most popular network protocol analyzer. It is
used for troubleshooting, analysis, development and education.
__________________________________________________________________
What's New
New and Updated Features
The following features are new (or have been significantly updated)
since version 1.99.8:
* Qt port:
+ The MTP3 statistics and summary dialogs have been added.
+ The WAP-WSP statistics dialog has been added.
+ The UDP multicast statistics dialog has been added.
+ The WLAN statistics dialog has been added.
+ The display filter macros dialog has been added.
+ The capture file properties dialog now includes packet
comments.
+ Many more statistics dialogs can be opened from the command
line via -z ....
+ Most dialogs now have a cancellable progress bar.
+ Many packet list and packet detail context menus items have
been added.
+ Lua plugins can be reloaded from the Analyze menu.
+ Many bug fixes and improvements.
The following features are new (or have been significantly updated)
since version 1.99.7:
* Qt port:
+ The Enabled Protocols dialog has been added.
+ Many statistics dialogs have been added, including Service
response time, DHCP/BOOTP, and ANSI.
+ The RTP Analysis dialog has been added.
+ Lua dialog support has been added.
+ You can now manually resolve addresses.
+ The Resolved Addresses dialog has been added.
+ The packet list scrollbar now has a minimap.
+ The capture interfaces dialog has been updated.
+ You can now colorize conversations.
+ Welcome screen behavior has been improved.
+ Plugin support has been improved.
+ Many dialogs should now more correctly minimize and maximize.
+ The reload button has been added back to the toolbar.
+ The "Decode As" dialog no longer saves decoding behavior.
+ You can now stop loading large capture files.
+ The Bluetooth HCI Summary has been added.
The following features are new (or have been significantly updated)
since version 1.99.6:
* Qt port:
+ The Bluetooth Devices dialog has been added.
+ The wireless toolbar has been added.
+ Opening files via drag and drop is now supported.
+ The Capture Filter and Display Filter dialogs have been added.
+ The Display Filter Expression dialog has been added.
+ Conversation Filter menu items have been added.
+ You can change protocol preferences by right clicking on the
packet list and details.
The following features are new (or have been significantly updated)
since version 1.99.4 and 1.99.5:
* Qt port:
+ Capture restarts are now supported.
+ Menu items for plugins are now supported.
+ Extcap interfaces are now supported.
+ The Expert Information dialog has been added.
+ Display and capture filter completion is now supported.
+ Many bugs have been fixed.
+ Translations have been updated.
The following features are new (or have been significantly updated)
since version 1.99.3:
* Qt port:
+ Several interface bugs have been fixed.
+ Translations have been updated.
The following features are new (or have been significantly updated)
since version 1.99.2:
* Qt port:
+ Several bugs have been fixed.
+ You can now open a packet in a new window.
+ The Bluetooth ATT Server Attributes dialog has been added.
+ The Coloring Rules dialog has been added.
+ Many translations have been updated. Chinese, Italian and
Polish translations are complete.
+ General user interface and usability improvements.
+ Automatic scrolling during capture now works.
+ The related packet indicator has been updated.
The following features are new (or have been significantly updated)
since version 1.99.1:
* Qt port:
+ The welcome screen layout has been updated.
+ The Preferences dialog no longer crashes on Windows.
+ The packet list header menu has been added.
+ Statistics tree plugins are now supported.
+ The window icon is now displayed properly in the Windows
taskbar.
+ A packet list an byte view selection bug has been fixed
([1]Bug 10896)
+ The RTP Streams dialog has been added.
+ The Protocol Hierarchy Statistics dialog has been added.
The following features are new (or have been significantly updated)
since version 1.99.0:
* Qt port:
+ You can now show and hide toolbars and major widgets using the
View menu.
+ You can now set the time display format and precision.
+ The byte view widget is much faster, particularly when
selecting large reassembled packets.
+ The byte view is explorable. Hovering over it highlights the
corresponding field and shows a description in the status bar.
+ An Italian translation has been added.
+ The Summary dialog has been updated and renamed to Capture
File Properties.
+ The VoIP Calls and SIP Flows dialogs have been added.
+ Support for HiDPI / Retina displays has been improved in the
official packages.
* DNS stats: + A new stats tree has been added to the Statistics
menu. Now it is possible to collect stats such as qtype/qclass
distribution, number of resource record per response section, and
stats data (min, max, avg) for values such as query name length or
DNS payload.
* HPFEEDS stats: + A new stats tree has been added to the statistics
menu. Now it is possible to collect stats per channel (messages
count and payload size), and opcode distribution.
* HTTP2 stats: + A new stats tree has been added to the statistics
menu. Now it is possible to collect stats (type distribution).
The following features are new (or have been significantly updated)
since version 1.12.0:
* The I/O Graph in the Gtk+ UI now supports an unlimited number of
data points (up from 100k).
* TShark now resets its state when changing files in ring-buffer
mode.
* Expert Info severities can now be configured.
* Wireshark now supports external capture interfaces. External
capture interfaces can be anything from a tcpdump-over-ssh pipe to
a program that captures from proprietary or non-standard hardware.
This functionality is not available in the Qt UI yet.
* Qt port:
+ The Qt UI is now the default (program name is wireshark).
+ A Polish translation has been added.
+ The Interfaces dialog has been added.
+ The interface list is now updated when interfaces appear or
disappear.
+ The Conversations and Endpoints dialogs have been added.
+ A Japanese translation has been added.
+ It is now possible to manage remote capture interfaces.
+ Windows: taskbar progress support has been added.
+ Most toolbar actions are in place and work.
+ More command line options are now supported
New File Format Support
BTSNOOP, PCAP, and PCAPNG
New Protocol Support
(LISP) TCP Control Message, Aeron, AllJoyn Reliable Datagram Protocol,
Android ADB, Android Logcat text, Apache Tribes Heartbeat, BGP
Monitoring Prototol (BMP), C15 Call History Protocol dissection
(C15ch), ceph, Concise Binary Object Representation (CBOR) (RFC 7049),
corosync/totemnet corosync cluster engine ( lowest
levelencryption/decryption protocol), corosync/totemsrp corosync
cluster engine ( totem single ring protocol), Couchbase, CP "Cooper"
2179, DJI UAV Drone Control Protocol, Dynamic Source Routing (RFC
4728), Elasticsearch, ETSI Card Application Toolkit - Transport
Protocol, eXpressive Internet Protocol (XIP), Generic Network
Virtualization Encapsulation (Geneve), Geospatial and Imagery Access
Service (GIAS), GVSP GigE Vision (TM) Streaming Protocol, HCrt, HiQnet,
IP Detail Record (IPDR), IPMI Trace, iSER, KNXnetIP, MACsec Key
Agreement - EAPoL-MKA, MCPE (Minecraft Pocket Edition), Message Queuing
Telemetry Transport For Sensor Networks (MQTT-SN), Network File System
over Remote Direct Memory Access (NFSoRDMA), OCFS2, OptoMMP,
Performance Co-Pilot Proxy, QNEX6 (QNET), RakNet games library, Remote
Shared Virtual Disk - RSVD, Riemann, S7 Communication, Secure Socket
Tunnel Protocol (SSTP), Shared Memory Communications - RDMA, Stateless
Transport Tunneling, Thrift, Time Division Multiplexing over Packet
Network (TDMoP), Video Services over IP (VSIP), Windows Search Protocol
(MS-WSP), and ZVT Kassenschnittstelle
Updated Protocol Support
Too many protocols have been updated to list here.
New and Updated Capture File Support
3GPP TS 32.423 Trace, Android Logcat text files, Colasoft Capsa files,
Netscaler 3.5, and Wireshark now supports nanosecond timestamp
resolution in PCAP-NG files.
New and Updated Capture Interfaces support
and Androiddump - provide interfaces to capture (Logcat and Bluetooth)
from connected Android devices
Major API Changes
The libwireshark API has undergone some major changes:
* The emem framework (including all ep_ and se_ memory allocation
routines) has been completely removed in favour of wmem which is
now fully mature.
* The (long-since-broken) Python bindings support has been removed.
If you want to write dissectors in something other than C, use Lua.
* Plugins can now create GUI menu items.
* Heuristic dissectors can now be globally enabled/disabled so
heur_dissector_add() has a few more parameters to make that
possible
__________________________________________________________________
Getting Wireshark
Wireshark source code and installation packages are available from
[2]https://www.wireshark.org/download.html.
Vendor-supplied Packages
Most Linux and Unix vendors supply their own Wireshark packages. You
can usually install or upgrade Wireshark using the package management
system specific to that platform. A list of third-party packages can be
found on the [3]download page on the Wireshark web site.
__________________________________________________________________
File Locations
Wireshark and TShark look in several different locations for preference
files, plugins, SNMP MIBS, and RADIUS dictionaries. These locations
vary from platform to platform. You can use About->Folders to find the
default locations on your system.
__________________________________________________________________
Known Problems
Dumpcap might not quit if Wireshark or TShark crashes. ([4]Bug 1419)
The BER dissector might infinitely loop. ([5]Bug 1516)
Capture filters aren't applied when capturing from named pipes. ([6]Bug
1814)
Filtering tshark captures with read filters (-R) no longer works.
([7]Bug 2234)
Resolving ([8]Bug 9044) reopens ([9]Bug 3528) so that Wireshark no
longer automatically decodes gzip data when following a TCP stream.
Application crash when changing real-time option. ([10]Bug 4035)
Hex pane display issue after startup. ([11]Bug 4056)
Packet list rows are oversized. ([12]Bug 4357)
Wireshark and TShark will display incorrect delta times in some cases.
([13]Bug 4985)
The 64-bit version of Wireshark will leak memory on Windows when the
display depth is set to 16 bits ([14]Bug 9914)
Wireshark should let you work with multiple capture files. ([15]Bug
10488)
__________________________________________________________________
Getting Help
Community support is available on [16]Wireshark's Q&A site and on the
wireshark-users mailing list. Subscription information and archives for
all of Wireshark's mailing lists can be found on [17]the web site.
Official Wireshark training and certification are available from
[18]Wireshark University.
__________________________________________________________________
Frequently Asked Questions
A complete FAQ is available on the [19]Wireshark web site.
__________________________________________________________________
Last updated 2015-09-01 18:01:23 UTC
References
1. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=10896
2. https://www.wireshark.org/download.html
3. https://www.wireshark.org/download.html#thirdparty
4. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1419
5. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1516
6. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1814
7. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=2234
8. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9044
9. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3528
10. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4035
11. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4056
12. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4357
13. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4985
14. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9914
15. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=10488
16. https://ask.wireshark.org/
17. https://www.wireshark.org/lists/
18. http://www.wiresharktraining.com/
19. https://www.wireshark.org/faq.html
Digests
wireshark-1.99.9.tar.bz2: 30495072 bytes
MD5(wireshark-1.99.9.tar.bz2)=359433dbde9890db52c84b19e986aa6f
SHA1(wireshark-1.99.9.tar.bz2)=93a7243997cd42c1751efde5839878d822385004
RIPEMD160(wireshark-1.99.9.tar.bz2)=0f8c2059eec85df6de348c0f14f2a473337a487f
Wireshark-win32-1.99.9.exe: 37066640 bytes
MD5(Wireshark-win32-1.99.9.exe)=922055f6fc54afa799f00f30be8c789c
SHA1(Wireshark-win32-1.99.9.exe)=109e811dee0eac8d80512db4275b81002af902ec
RIPEMD160(Wireshark-win32-1.99.9.exe)=f7883503afa87c0517508b770fc225b1fe069fc5
Wireshark-win64-1.99.9.exe: 46254920 bytes
MD5(Wireshark-win64-1.99.9.exe)=5c10c960b96a0f425efe02a955602f7e
SHA1(Wireshark-win64-1.99.9.exe)=5abd582991814ca5a20be5ce0639772aedc35068
RIPEMD160(Wireshark-win64-1.99.9.exe)=db3c739312c9cb96f31ea16fa08956e16a6a8ca3
WiresharkPortable_1.99.9.paf.exe: 41398440 bytes
MD5(WiresharkPortable_1.99.9.paf.exe)=83be8137222c9e7baaeeac8cdbfc0f9f
SHA1(WiresharkPortable_1.99.9.paf.exe)=4d53a8c4cc7e4b04cf1b0d340d43ba00fe103466
RIPEMD160(WiresharkPortable_1.99.9.paf.exe)=49fd2dcddec6de64a33d398cb5530c1679343174
Wireshark 1.99.9 Intel 32.dmg: 28414486 bytes
MD5(Wireshark 1.99.9 Intel 32.dmg)=064e2b6a5602951955870148bc3b4653
SHA1(Wireshark 1.99.9 Intel 32.dmg)=fa003a6f0cdb0627bfd550a6c8e27e8d40a4486b
RIPEMD160(Wireshark 1.99.9 Intel
32.dmg)=64b913f205141fbc1c9184536078bff802519b0b
Wireshark 1.99.9 Intel 64.dmg: 36088142 bytes
MD5(Wireshark 1.99.9 Intel 64.dmg)=b28948200222068d5f639dab606eaef0
SHA1(Wireshark 1.99.9 Intel 64.dmg)=2edc6e53aec2fcafd53526e855a4e122fd6d6fb3
RIPEMD160(Wireshark 1.99.9 Intel
64.dmg)=b7cdc72b04024b9cec7d159fb04c435e94a974a5
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEARECAAYFAlXnO38ACgkQpw8IXSHylJoHLgCbBEU20iBnrO5Y4wDy/nh4rhOv
ULoAn0nYAosAefdgYbFuHR0u2iFURoF9
=vbQm
-----END PGP SIGNATURE-----
- Next by Date: [Wireshark-users] Wireshark with Virtualbox on Archlinux
- Next by thread: [Wireshark-users] Wireshark with Virtualbox on Archlinux
- Index(es):