Wireshark-users: Re: [Wireshark-users] H.264 capture

From: NITIN GOYAL <nitinkumgoyal@xxxxxxxxx>
Date: Tue, 31 Mar 2015 21:47:30 +0530
Ah Wireshark is not showing as its ts stream file and the data is segmented in PES.

I can see that PID 17 or 0x0011 is h264 video in this ts.



On Tue, Mar 31, 2015 at 8:41 PM, Ran Shalit <ranshalit@xxxxxxxxx> wrote:
> in the preferences you have to enable the h264 protocol and it will display
> the h264 part from mpeg-ts.

On preferences->protocol->H.264, it opens a window wwith "H264 Dynamic
Payload types". What should I put there ? It is not RTP, but  mpeg-ts
on udp.
Did you see any H.264 capture in wireshark with the sample in link ?

Thanks,
Ran

>
> On Tue, Mar 31, 2015 at 2:37 PM, Ran Shalit <ranshalit@xxxxxxxxx> wrote:
>>
>> Hello,
>>
>> When capturing mpeg-ts video with the following file
>>
>>
>> https://drive.google.com/file/d/0B22GsWueReZTeEpLbzBGUXVLbEU/view?usp=sharing
>>
>> I don't see in wireshark H.264 protocol identified (only mpeg-ts).
>> Is there some plug-in or something else that I need to configure ?
>>
>> Thank you,
>> Ran
>>
>>
>>
>> ___________________________________________________________________________
>> Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
>> Archives:    https://www.wireshark.org/lists/wireshark-users
>> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>>
>> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
>
> ___________________________________________________________________________
> Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives:    https://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe