[Kevin Cullimore <kcullimo@xxxxxxxxxx>]

On 10/16/2012 9:19 AM, andre.noel@xxxxxxx wrote:

Hello,

 

I’m used to give more precise description of my connection in Wireshark interface Properties in the comment field

So it’ easy to select the interface facing the switch I want to capture.

 

The problem I have is on one my HP  machine I have 8 interfaces and it’s hard to tell which is which from inside Wireshark

because  the identification  like “\Device\NPF_{C4F…………}  is not shown in windows interface list  and the description field is

all the same:

 

HP NC364T PCIe Quad Port Gigabit Server Adapter

HP NC364T PCIe Quad Port Gigabit Server Adapter

…

 

As opposed as windows who list them as for example:

 

HP NC364T PCIe Quad Port Gigabit Server Adapter #3

HP NC364T PCIe Quad Port Gigabit Server Adapter #4  

…

 

Any idea of what I can do to easily do a match ?    ( Now I put all the connection in “shutdown” state in Cisco switches and re-enable them

one at a time to see them reappear in Wireshark but it’s a bit cumbersome…)

Which text output (following the value that appears in the registry) is dumpcap.exe -D providing you with?

 

regards.

 

Andre Noel

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe