Are you sure it's a hub and not a switch? I've seen so-called "hubs" that
were actually switches.
--
Phil Paradis | Network Administrator | Churchill Downs, Inc. | 700 Central
Ave | Louisville KY | +1 502 509 7445
On 4/21/12 11:25 AM, "Marius-Simion Cristea" <cristea12@xxxxxxxxx> wrote:
>Hi,
>
>I want to capture the traffic (the commands) that are sent from a
>SCALANCE touch panel emulator to a PLC. The configuration of my network
>looks like this:
>
>Emulator---HUB---Scalance_Switch---PLC
> |
>PC (Wireshark)
>
>I'm giving commands to the PLC from the emulator, the PLC responds, but I
>can't capture any of those commands using Wireshark, i'm seeing only ARP,
>LLDP, PN-DCP packets and some other broadcast packets.
>
>Is it possible to capture those commands using Wireshark? if so, what am
>I doing wrong? because, as far as I know the hub must send all the
>packets that are meant for the PLC also to the PC.
>
>Thanks!
>__________________________________________________________________________
>_
>Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
>Archives: http://www.wireshark.org/lists/wireshark-users
>Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>
>mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
This Churchill Downs Incorporated communication (including any attachments) is intended for the use of the intended recipient(s) only and may contain information that is confidential, privileged or legally protected. Any unauthorized use or dissemination of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the sender by return e-mail message and delete all copies of the original communication. Thank you for your cooperation.