On 1/20/2012 1:41 AM, Guy Harris wrote:
On Jan 19, 2012, at 5:01 PM, John S wrote:
after reading the wireless capture setup, I think the problem is that I'm running Wireshark on Windows XP and this apparently doesn't work well when sniffing other machine's traffic in a wireless network environment.
Has anyone found a way to do this?
Sometimes, an extra word or two can greatly enhance the focus of a given
question:
"Has anyone found a FREE/trivially-inexpensive way to do this?"
The challenge of clarifying "this" might pose a greater challenge:
If "this" refers to setting the wireless adapter transmitting &
receiving the packets in question as the capture interface while running
wireshark atop M$ windows operating systems, then the limitations
referred to below apply. Otherwise, hardware-based solutions still
appear to work (in this case, it would be somewhat inexcusable if they
didn't):
http://www.riverbed.com/us/products/cascade/wireshark_enhancements/airpcap.php
The only programs I know that can do Wi-Fi captures on Windows XP, such as Tamosoft's CommView for WiFi:
http://www.tamos.com/products/commwifi/
or WildPackets' OmniPeek:
http://www.wildpackets.com/products/portable_analysis/omnipeek_software
do so by providing their own device drivers for a set of supported 802.11 adapters. Even Microsoft's own Network Monitor 3:
http://blogs.technet.com/b/netmon/
only supports Wi-Fi capturing on Windows Vista and Vista 7; they rely on some networking features that first showed up in Vista (NDIS 6 and Native Wi-Fi) and, I think, rely on the driver for the Wi-Fi adapter to support Native Wi-Fi). Wireshark uses WinPcap on Windows; WinPcap doesn't use the Vista-and-later networking features and thus doesn't support monitor mode on Wi-Fi.
___________________________________________________________________________
Sent via: Wireshark-users mailing list<wireshark-users@xxxxxxxxxxxxx>
Archives:http://www.wireshark.org/lists/wireshark-users
Unsubscribe:https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe