|
Try this:
Go to Statistics > IO Graphs
Make two filters like : ip.src ==
x.x.x.x
And ip.dst == x.x.x.x
Regards,
Dave
----- Original Message -----
Sent: Monday, December 05, 2011 5:22
AM
Subject: [Wireshark-users] Question about
filtering
Greetings!
I'm investigating audio-loss for a VoIP
implementation. When I listen to the RTP stream, I can see that at a certain
point in the conversation one party starts to "not hear" the other side. In
other words, one-way audio muting is happening.
My question is how do
I correlate that particular muting which I can deduce (from one side in
question repeating their hellos again and again) in the stream to a
packet-stream in wireshark? So how do I know the point where the packets start
to get lost in the conversation from the side that muted? (It's a 100 meg
capture)
One way I can think of is to go through the capture
packet-by-packet and see where only packets from one side start showing up in
the capture, but is there another more elegant way to do this? Can I write a
filter in such a way that it finds the packets coming only from one side in
succession whereas it should be a to-and-fro that should be reported?
Hoping that I asked the question clearly. If not, please let me know
if more information is needed and/or you know the hidden trick that I seem to
be missing :-)
Thanks,
Basti Ji
___________________________________________________________________________
Sent
via: Wireshark-users mailing list
<wireshark-users@xxxxxxxxxxxxx>
Archives:
http://www.wireshark.org/lists/wireshark-users
Unsubscribe:
https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
|