There still is a slight problem. If the trace starts with a series of layer
2
receive ready frames, you get one of these two errors:-
The capture file appears to be damaged or corrupt.
(aethra: File has 1-byte record, less than minimum of 6)
or:-
The capture file appears to have been cut short in the middle of a packet.
I have attached an example of this to the bug:-
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6483
-----Original Message-----
From: Guy Harris
Sent: Thursday, October 27, 2011 4:06 AM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] ISDN Layer 3 decode
On Oct 26, 2011, at 7:38 AM, Keith French wrote:
I have just tried opening both of the .aps files I attached to the
enhancement request with SVN-39603, but unfortunately Wireshark reports
"The capture file appears to have been cut short in the middle of a
packet" and shows 0 packets in the status bar.
There was a cut-and-pasteo in the code that meant it didn't work on 32-bit
platforms; I was able to reproduce it on my 32-bit Windows virtual machine.
Try build 39628 or later.
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe