Hi,
The "X" on the stream appears if at least one packet is marked non-OK.
non-OK currently includes:
* Comfort noise (PT=13 or PT=19)
* Wrong sequence nr.
* Changes in Payload type (PT)
* Incorrect timestamp
* Marker missing?
for details, see gtk/rtp_analysis.c
As you can see, there's no check concerning the latency or framing.
For other info around RTP analysis, see http://wiki.wireshark.org/RTP_statistics
Regards,
Lars
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Patrice Bertin
Sent: jeudi 6 octobre 2011 15:19
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Latency in RTP streams
Hi everybody,
I have a capture example of a SIP call with G711 codec.
Looking at the RTP streams, the final field shows an X which normally means that we have a VoIP related problem.
By selecting the problematic stream and analysing it, wireshark provides a packet-by-packet look at the stream.
The thing I don't understand, is why does it give me the status "OK"
everywhere if I have the famous X and especially when I have a latency of 5843.74 ms (cf the screencapture joined in the mail).
Other thing, which values Wireshark put for the latency and jitter? Is it possible to modify it?
I hope this is understandable enough.
Thanks for your reply
Patrice