[M K <gedropi@xxxxxxxxx>]

After installing, got a BSOD stop message upon reboot.

On 2/18/11, shartman@xxxxxxxxxxxxxxxxxxxxx
<shartman@xxxxxxxxxxxxxxxxxxxxx> wrote:
> I am not sure if this is what you are looking for but I use: The Colasoft
> Packetbuilder its free at http://www.colasoft.com/packet_builder/
>
> I use it many times to test my snort rules
>
>> -------- Original Message --------
>> Subject: [Wireshark-users] Packet Builder
>> From: Barry Constantine <Barry.Constantine@xxxxxxxx&gt;
>> Date: Fri, February 18, 2011 2:05 pm
>> To: "wireshark-users@xxxxxxxxxxxxx" <wireshark-users@xxxxxxxxxxxxx>
>>
>> Hi,
>>
>> I need to generate custom Ethernet OAM frames and am looking for a good
>> way to do this.
>>
>> I’ll have to change a lot of specific fields and generate a lot of traffic
>> and so far all I’ve found are freeware tools that let me edit the hex.
>>
>> I can load a capture file and then manually edit hex but this is painful.
>>
>> It would be ideal if there was a similar tool that understood Wireshark
>> dissectors (since Wireshark decodes OAM) and then I could just change the
>> specific fields more easily.
>>
>> Thanks,
>> Barry
>>
>>
>> ________________________________
>> ___________________________________________________________________________
>> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
>> Archives: http://www.wireshark.org/lists/wireshark-users
>> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe