A
good starting point is http://wiki.wireshark.org/FrontPage
en specifically the page http://wiki.wireshark.org/CaptureSetup/Ethernet.
HTH,
Stefaan
From:
wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Joe
Brouillette
Sent: zondag 5 september 2010 0:10
To: 'wireshark-users@xxxxxxxxxxxxx'
Subject: [Wireshark-users] Why so many Out-of-Order packets
Hey all, I
did a scan yesterday and I'm a little discouraged by what I'm seeing. I did a
quick scan that rounded up 85,541 packets and of those packets 21,148 are
Out-of-Order packets (expert.message == "Out-Of-Order segment"). From
what I can see several of the machines on my network are producing these
packets. Some of the protocols are TCP, HTTP, SMB, TDS and DCERPC. I tried
Googling this issue and saw that capturing packets from a mirrored port can do
this. Well, I’m connected to an HP 2610 switch so how do I capture packets on
my network without mirroring a port or ports? I'm pretty new to packet sniffing
so please keep advanced technical terms to a minimum. Any help here would be
greatly appreciated.
Thanks,
Joe B