I just installed Wireshark 1.4 on WinXP. Under
Telephony, VoIP Calls, the GRAPH button has been replaced by a FLOW button. The
ladder diagram produced by the FLOW button includes the SIP and RTP, but not the
T.38. How can I make the ladder diagram display the T.38 as in previous releases
of Wireshark?
This sample has 352 T.38 packets, comprising an
entire fax call:
|Time |
12.40.234.2
|
|
|
| 12.20.15.34
|
|0.000
| INVITE SDP ( g729 g711U
telephone-event
X-nt-i...req) |SIP From:
"BCM450 FAX"<sip:[email protected]
To:<sip:[email protected]
|
|(5060) ------------------> (5060)
|
|0.050
| 100
Trying|
|SIP Status
|
|(5060) <------------------ (5060)
|
|2.041
| 180 Ringing SDP ( g729
telephone-event) |SIP
Status
|
|(5060) <------------------ (5060)
|
|2.041
| RTP
(g729)
|RTP Num packets:507 Duration:23.360s SSRC:0xD5D81350
|
|(28000) <------------------ (16604) |
|2.092
| RTP
(g729)
|RTP Num packets:168 Duration:8.499s SSRC:0x4A0BC4D1
|
|(28000) ------------------> (16604) |
|10.607
| 200 OK SDP ( g729
telephone-event) |SIP
Status
|
|(5060) <------------------ (5060)
|
|10.611
| RTP
(g729)
|RTP Num packets:308 Duration:11.799s SSRC:0x4A0BC4D1
|
|(28000) ------------------> (16604) |
|10.619
|
ACK
|
|SIP Request
|
|(5060) ------------------> (5060)
|
|25.352
| INVITE SDP (
t38)
|SIP Request
|
|(5060) <------------------ (5060)
|
|25.362
| 100
Trying|
|SIP Status
|
|(5060) ------------------> (5060)
|
|25.403
| 200 OK SDP (
t38)
|SIP Status
|
|(5060) ------------------> (5060)
|
|25.470
|
ACK
|
|SIP Request
|
|(5060) <------------------ (5060)
|
|47.896
| BYE
|
|SIP Request
|
|(5060) ------------------> (5060)
|
|47.943
| 200 Ok
|
|SIP Status
|
|(5060) <------------------ (5060)
|
Harvey S. Cohen
AT&T Labs, Middletown, NJ
Mobile +1-908-768-5833
Office +1-732-420-4099