Hi
if you using windows for testing i suggest
Ntttcp this util will test and report throughput but also lots of hardware NIC info
if you are using Linux i suggest using
IPERF this util will report also throughputbut for hardware NIC info you will need to use wireshark 802.3 info to check if are errors
Regards
On Thu, Jul 22, 2010 at 4:25 PM, JM
<hondgm@xxxxxxxxx> wrote:
Hello,
We're going to do some Ethernet physical layer testing, basically testing the effects of different types of cable (for industrial/automotive). For the most part, this will simply involve a single link with varying qualities of cable between the two PCs.
Since I've already used Wireshark to analyze packets, I was thinking maybe it could also do this. I've done some searching, but didn't find much. What I'd like to have is two computers, or maybe just one with two NICs, send traffic through the link and report what the throughput, latency, error rate, etc is.
If Wireshark isn't able to do this, or if an add-on isn't available, does anyone have any suggestions? Free/open source is of course preferred.
|
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
--
Tal Bar-or
Attachment:
shark.png
Description: PNG image
