Wireshark-users: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1

From: "Keith French" <keithfrench@xxxxxxxxxxxxx>
Date: Fri, 2 Jul 2010 13:15:04 +0100
Hi Stig,

No "ip.dsfield" gives the decimal for the whole octet, whereas the DSCP is made up of the 6 most significant bits.

For example a packet that has it's DSCP set to decimal 46 is:-

101110

The ECN bits are not normally used, so the complete octet becomes:-

10111000

which is decimal 184.

The value though of the "ip.dsfield" gives it's output in decimal, whereas "ip.dsfield.dscp" expresses the DSCP in hex, not decimal.

Keith French.


--------------------------------------------------
From: "Stig Bj�rlykke" <stig@xxxxxxxxxxxxx>
Sent: Thursday, July 01, 2010 5:12 PM
To: "Community support list for Wireshark" <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1

On Wed, Jun 30, 2010 at 7:38 PM, Keith French <keithfrench@xxxxxxxxxxxxx> wrote:
That is a bit better, but the columns now show the hex value, not decimal,
as it did in V1.2.x where the filter used to be:-

Does "ip.dsfield" show what you want?


--
Stig Bj�rlykke
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users

mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe