It is only the DSCP filter that causes this problem, not the one for 802.1P
COS. When set to be unresolved in the Column context menu, the COS value
shown for each packet is in decimal. The only problem then is that the DSCP
column unresolved shows a packet's value in hex, not decimal.
In V1.2.x where the filter used to be:-
ip.dscp.value
which did display column entries in decimal. Since the filter syntax was
changed to:-
ip.dsfield.dscp
it only shows this in hex, not decimal. It would be very useful if there was
a way to display the entries for packets in decimal.
Keith French.
--------------------------------------------------
From: "Keith French" <keithfrench@xxxxxxxxxxxxx>
Sent: Wednesday, June 30, 2010 6:38 PM
To: "Community support list for Wireshark" <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1
That is a bit better, but the columns now show the hex value, not decimal,
as it did in V1.2.x where the filter used to be:-
ip.dscp.value
The problem seems to have crept in since the filter syntax was changed
to:-
ip.dsfield.dscp
Keith French.
--------------------------------------------------
From: "Stig Bj�rlykke" <stig@xxxxxxxxxxxxx>
Sent: Wednesday, June 30, 2010 1:59 PM
To: "Community support list for Wireshark" <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1
On Wed, Jun 30, 2010 at 2:45 PM, Keith French <keithfrench@xxxxxxxxxxxxx>
wrote:
I have just tried the development release Version 1.5.0-SVN-33383 and
that
is still the same as 1.4.0rc1, the columns for DSCP & 802.1P COS are
still
resolved & hence show the full verbose setting for each packet under the
column headers. It would be far more useful if this could be unresolved,
showing just the decimal value.
Did you try unselect "Show Resolved" in the column pop-up menu?
--
Stig Bj�rlykke
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe