Hi Martin,
Hope this isn't too simple of an answer, but are you using display (or capture) filters?
If you're using a display filter to restrict what you see to your own machine, you want
ip.addr = x.x.x.x
Before I learned that, I was using ip.src & ip.dst, which would result in the situation you describe...
I don't use capture filters much, so don't know the equivalent options in capture filter syntax.
~~~~~~~~~~~~~~~~~~~~~~~~
Linnea Wren
Sr. Network Coordinator
Peralta Community College District
~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Gillett, Martin
Sent: Thursday, June 03, 2010 1:13 PM
To: 'wireshark-users@xxxxxxxxxxxxx'
Subject: Re: [Wireshark-users] Understanding Source and Destination
I read this this, but it says " ...why do I see only packets to and from my machine..."
The machine, I ran Wireshark from, only shows up in the destination column . I would expect to also it in the source sometimes as well - no ?
Martin
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe