["Lori" <Verdandi@xxxxxxxxxxxxxxxxxx>]

You said previously:
> I configured a port mirroring on port 16 from port 25 (I tried mirror in 
> solo, mirror out solo, and both)

http://support.3com.com/documents/switches/baseline/Switch_2426_2226_2250_User_Guide.pdf
[Page 71 covers Port Mirroring]

Port 16 should be set as Port Type Monitor
Port 25 should be set as Port Type Mirror

> From what I'm reading, your workstation is attached to Port 16 and port 25 
is connected to your Internet access device.

Hope this helps.

Lori

----- Original Message ----- 
From: "Ronan SAVY" <R.SAVY@xxxxxxxxxx>
To: "Community support list for Wireshark" <wireshark-users@xxxxxxxxxxxxx>
Sent: Saturday, March 13, 2010 9:31 AM
Subject: [Wireshark-users] RE : Can't see http packets


ok
as i said i tried every option of monitoring port, may be the restriction 
seeing only broadcast come from my switches configuration... any hint where 
i should have a look on switche restriction?
or may be on wireshark checking for unicast incoming, right?
________________________________________
De : wireshark-users-bounces@xxxxxxxxxxxxx 
[wireshark-users-bounces@xxxxxxxxxxxxx] de la part de Martin Visser 
[martinvisser99@xxxxxxxxx]
Date d'envoi : samedi 13 mars 2010 11:35
� : Community support list for Wireshark
Objet : Re: [Wireshark-users] Can't see http packets

My guess is that if you are only seeing NBNS,      DHCP,      ARP,     IGMP 
protocol packets you are only seeing broadcasts from the rest of the 
network.

You might need to really check that your port mirroring is working 
correctly.

Regards, Martin

MartinVisser99@xxxxxxxxx<mailto:MartinVisser99@xxxxxxxxx>


On Sat, Mar 13, 2010 at 2:03 AM, Ronan SAVY 
<R.SAVY@xxxxxxxxxx<mailto:R.SAVY@xxxxxxxxxx>> wrote:
Hi
I would like to grab the http packet in order to have a clear view of web 
usage before configuring some kind of filter over my compagnie network.
Here is what I installed:
I have a Windows XP SP3 workstation with wireshark installed on it and 2 nic 
one is a nvidia nforce and the other a D-link DFE-530TX
I connected the D-link NIC on port 16 of my 3com 2226-SFP Plus
Behind my 3 com switch I have 5 3com baseline switches connected in cascade
On port 25 of my switch I have a Linksys BEFSX41 with on his wan my FAI 
modem going out on internet

I configured a port mirroring on port 16 from port 25 (I tried mirror in 
solo, mirror out solo, and both)
I checked that the D-link nick can work on promiscuous mode (using promqry)

When I launch wireshark from station I can�t see any http traffic going out 
safe from SSDP protocol
I also see other packet grab from other machine on my network, packet like :

-          NBNS

-          DHCP

-          ARP

-          IGMP

Even when I browse internet on the workstation where wireshark is installed 
using the second NIC� I can�t see the HTTP request going through

May be I did something wrong but I don�t know what? I checked the advanced 
option of my NIC to see if there is Checksum offload option.. but nothing.

Any help would be most welcome as I have no more idea on what else I can do.
thanks

___________________________________________________________________________
Sent via:    Wireshark-users mailing list 
<wireshark-users@xxxxxxxxxxxxx<mailto:wireshark-users@xxxxxxxxxxxxx>>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
           mailto:wireshark-users-request@xxxxxxxxxxxxx<mailto:wireshark-users-request@xxxxxxxxxxxxx>?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe