You may also use online interactive packet builder:
http://www.linkbit.com/uiplus/
--MS
On Jan 10, 2010, at 9:11PM, Hrishikesh Murali wrote:
> Hi,
>
> Is it possible to create packets with customized HTTP/TCP/IP headers and then transmit them using wireshark? If not, is there a tool which makes this possible?
>
> Also, is it possible to temporarily capture packets using wireshark, modify any content we want to, and then transmit them to their desired location?
>
> I have another problem. I am connected in a LAN using ethernet, and I use wireshark to sniff packets through my interface. Even though I enable promiscuous mode, I am still only able to see packets going in and out of my system, even though other users are active in the LAN. Does this mean the network is a point-to-point network? Or is there any other possible conclusion?
>
> --
> Thanks and Regards,
> Hrishikesh Murali
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
--
Michael Sukhar, Linkbit, Inc. 3180 De La Cruz Blvd, Ste 200 Santa Clara, CA 95054-2434, USA mailto: msukhar@xxxxxxxxxxx Ph: +1.408.969.9940 x102 Fax: +1.408.273.6009 http://www.linkbit.com
------------------------------------------------------------------------
This e-mail and any files transmitted with it are the property of Linkbit, Inc., are CONFIDENTIAL, and are intended solely for the use of the individual or entity to which this e-mail is addressed. If you are not one of the named recipient's or otherwise have reason to believe that you have received this message in error, please notify the sender and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.