Wireshark-users: Re: [Wireshark-users] no eth interface

From: Martin Visser <martinvisser99@xxxxxxxxx>
Date: Sun, 20 Sep 2009 22:54:07 +1000
It is more likely that the issue with not seeing the NIC is due to permissions rather than the chipset. You really need to provide at least the platform you are running on (Windows/Linux) and version. (Paste the output from the Wireshark "About" box). (Also if you are running on Windows make sure you installed WinPcap when you installed).


MartinVisser99@xxxxxxxxx


On Sun, Sep 20, 2009 at 8:40 PM, M.Emin.Baş <tespara@xxxxxxxxx> wrote:
my NIC is  "Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller" but wireshark does not recognize it

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe