[Horyong Choi <garuta@xxxxxxxxxxxxxxxxxx>]

Hi,

I got a problem about ANSI_MAP ASN.1 compile in wireshark 1.2.1.

In wireshark ansi_map.asn file can’t complie because it has some problems.

At the first, SignalQuality is as below but these are ranging values in 2.240(p.550-310) of 3GPP2 spec X.S0004-550-E_v2.0_070723.

/////////////////////////////////////////////////////////////

Wireshark ansi_map.asn file

/////////////////////////////////////////////////////////////

-- 6.5.2.121

-- 1 0 0 0 1 0 1 1 (0x8b)(11)

SignalQuality ::= INTEGER{

           not-a-usable-signal (0),

           treat-as-Not-a-usable-signal (1),

           treat-as-Not-a-usable-signal (2),

           treat-as-Not-a-usable-signal (3),

           treat-as-Not-a-usable-signal (4),

           treat-as-Not-a-usable-signal (5),

           treat-as-Not-a-usable-signal (6),

           treat-as-Not-a-usable-signal (7),

           treat-as-Not-a-usable-signal (8),

           usable-signal-range (9),

           usable-signal-range (245),

           treat-the-same-as-interference (246),

           treat-the-same-as-interference (247),

           treat-the-same-as-interference (248),

           treat-the-same-as-interference (249),

           treat-the-same-as-interference (250),

           treat-the-same-as-interference (251),

           treat-the-same-as-interference (252),

           treat-the-same-as-interference (253),

           treat-the-same-as-interference (254),

           interference (255)

} (0..255)

/////////////////////////////////////////////////////////////

It should be change to like this..Just I guess.

/////////////////////////////////////////////////////////////

-- 6.5.2.121

-- 1 0 0 0 1 0 1 1 (0x8b)(11)

SignalQuality ::= INTEGER{

           not-a-usable-signal (0),

           treat-as-Not-a-usable-signal (1..8),

           usable-signal-range (9..245),

           treat-the-same-as-interference (246..254),

           interference (255)

} (0..255)

----------------------------------------------------------------

And the other problem is TriggerAddressList.

It is using a different name but has a same value to 278 and thus it occurred to compile error.

 

-- 6.5.2.de

-- 1 0 1 1 1 1 1 1 (0xbf)

-- 1 0 0 0 0 0 1 0 (0x82)

-- 0 0 0 1 0 1 0 0 (0x14)(276)

TriggerAddressList ::= SET{

           triggerList                               [278] IMPLICIT TriggerList,

--         M 6.5.2.dg

           triggerListOpt                [278] IMPLICIT TriggerList OPTIONAL

--         O 6.5.2.dg a

----------------------------------------------------------------

Please let me know about how can I complie it.

 

Thanks

H.R Choi.

 

 

---

From: Anders Broman [mailto:anders.broman@xxxxxxxxxxxx]
Sent: Monday, August 31, 2009 11:20 PM
To: 최호룡; Community support list for Wireshark
Subject: RE: [Wireshark-users] How can decode the ANSI MAP over ITU-T SCCP andTCAP?

 

Hi,

I don't think it's possible currently. And I doubt that it's standardised how to do it.

Do you have a sample trace to share so we can see how it's done?

Regards

Anders

 

---

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Horyong Choi
Sent: den 31 augusti 2009 07:25
To: 'Community support list for Wireshark'
Subject: [Wireshark-users] How can decode the ANSI MAP over ITU-T SCCP andTCAP?

Hi all,

Please let me know that the way of decode of ANSI MAP in case of SCCP and TCAP is ITU-T spec.

Answer me please.

 

Thanks.

H.R. Choi