Wireshark-users: Re: [Wireshark-users] Filtering ICMP Packets Based on IP Addresses in the ICMP P

From: "Steven Shippee" <slshippee@xxxxxxxxxxx>
Date: Sat, 30 May 2009 09:30:14 -0700
I've had better luck with filters such as ip.addr==10.10.208.211


-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Merton Campbell
Crockett
Sent: Saturday, May 30, 2009 9:24 AM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Filtering ICMP Packets Based on IP Addresses in
the ICMP Payload

I've used Ethereal and Wireshark for a number of years to either  
capture or analyze network traffic.  I am looking at a problem  
involving one of our servers.  I have used a Cisco NAM to capture all  
traffic to or from the server.

In addition to looking at traffic to or from specific clients, I want  
to look at any ICMP traffic that involves the specific client.  I've  
used the following filter expression.

	icmp or ip.addr eq 10.10.208.211

Unfortunately, this filter includes all ICMP traffic instead of just  
the ICMP traffic that is related to 10.10.208.211.

Is there a way to filter ICMP traffic based on the IP, TCP, or UDP  
headers that are being returned in the payload of the ICMP packet?

If not, is there a way to remove "uninteresting" packets from the  
packet display pane?

Merton Campbell Crockett
m.c.crockett@xxxxxxxxxxxxxx



___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
 
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe