Wireshark-users: [Wireshark-users] Simultaneous use of capture and display filter while capturing

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: Tapas Chatterjee <tapas.chatterjee@xxxxxxxxxxx>
Date: Thu, 28 May 2009 16:18:46 +0530

Hi,

 

Is it possible to use "-f" and "-R" simultaneously while capturing using tshark.

e.g tshark -i eth0 -f tcp -R "ip.src == 10.20.30.20" -w output.pcap

 

Thanks and Regards,

Praveen Jha

 


"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error,please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."