Hi,
I Committed a fix in revision 27923. The problem is that the dissector is
assembled from a number of standard documents and the may be cut-and-paste
Errors, missed updates etc. And a poor standard at that in my opinion...
Regards
Anders
-----Ursprungligt meddelande-----
Från: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För Sanjay Nayak
Skickat: den 1 april 2009 14:49
Till: wireshark-users@xxxxxxxxxxxxx
Ämne: [Wireshark-users] Decoding problem in ANSI MAP messages
Hello
I want to decode the ANSI MAP Authentication Failure Report message in
the latest wireshark.
According to the section 2.4 of the spec.
http://www.3gpp2.org/Public_html/specs/X.S0004-540-E_v2.0_070723.pdf
Here there are seven mandatory parameters for the message
Authentication Failure Report.
1. Electronic serial number
2. MSID(i.e MIN/IMSI)
3.Report Type
4.System Access Type
5.System Capabilities(Serving)
That i have already given in my message.
But here for the parameter MSID,
if i give IMSI instead of MIN. Then it shows
BER Error: Unknown field in SET class:CONTEXT(2) tag:242.
Also it shows two tag errors at the last
1.BER Error: Missing field in SET class:CONTEXT(2) tag:8 expected
2.BER Error: Missing field in SET class:CONTEXT(2) tag:44 expected
That means it considers two extra parameters as mandatory. Plz
suggest what is the problem with it?
For parameters the spec is
http://www.3gpp2.org/Public_html/specs/X.S0004-550-E_v2.0_070723.pdf
Regd's
Sanjay
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe