Wireshark-users: Re: [Wireshark-users] Crosscompiling TSHARK to run on embedded linux on ppc440!

From: H Aslam <hassan-aslam@xxxxxxxxxxx>
Date: Mon, 9 Feb 2009 05:36:51 +0100
I have to filter mpeg4 streams and analyze them directly on the ppc!

> From: guy@xxxxxxxxxxxx
> To: wireshark-users@xxxxxxxxxxxxx
> Date: Sun, 8 Feb 2009 20:16:15 -0800
> Subject: Re: [Wireshark-users] Crosscompiling TSHARK to run on embedded linux on ppc440!
>
>
> On Feb 8, 2009, at 8:04 PM, H Aslam wrote:
>
> > Do I have to use my eldk package and "make" with a powerpc arch?
>
> Yes - if you want a version of TShark that runs on your embedded
> system, you will have to compile it with ELDK.
>
> If ELDK has a GLib package, install it first. Otherwise, you will
> have to build GLib under ELDK, and include that with TShark.
>
> In addition, if you plan to capture traffic with TShark, then, if ELDK
> has a libpcap package, you will need to install it as well, otherwise
> you will have to build libpcap under ELDK as well, and include that
> with TShark.
>
> And, as I mentioned earlier, if all you want to do is capture traffic,
> you might want to just build dumpcap (or just run tcpdump). What is
> it you need to do with TShark on the PPC440 machine?
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe


check out the rest of the Windows Live™. More than mail–Windows Live™ goes way beyond your inbox. More than messages