Hey again,
did a yum install yum install glib2-devel and compiled.. will this not work?
now i assume i can take the compiled files and just crosscompile with eldk to run on the ppc440?
where are the files located that I have to compile?
> From: guy@xxxxxxxxxxxx
> To: wireshark-users@xxxxxxxxxxxxx
> Date: Sun, 8 Feb 2009 18:35:40 -0800
> Subject: Re: [Wireshark-users] Crosscompiling TSHARK to run on embedded linux on ppc440!
>
>
> On Feb 8, 2009, at 6:25 PM, H Aslam wrote:
>
> > I just did a yum install glib2... Didn't work!
>
> That probably installed GLib for use on the machine on which you ran
> yum, which is presumably your development machine, not the PPC440
> embedded Linux machine.
>
> The problem is that you want to cross-compile a program using GLib
> (TShark or dumpcap) on that machine, with the target being not the
> machine on which you're compiling it (an x86 machine), but the
> embedded machine in question (a PPC machine).
>
> This means you'll need to install, on your development machine, a
> version of GLib configured and built for your PPC440 embedded Linux
> machine. It would presumably be installed somewhere other than /usr/
> lib or /usr/local/lib, so that it doesn't overwrite the version on
> your system.
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
> mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!
|