Hello,
i tried to send the packets every 20ms instead of 10ms,and the new recorded trace reflects this change.
In the meanwhile,i started using a more precise function to retrieve the system time,and it clearly says i am sending packets every 10ms (the old one had a 15.6ms precision)....but still in wireshark i see a shorter delta time...
Alexandre Aeschbach wrote:
Hi Frank,
you could try to change the delay of your generated packets by 10ms (to
26ms) and record a new trace.
Then you could check if the delta of 10ms is visible in the captured
data after this change.
Just to see if the timestamp is recognized correctly.
Regards,
Alex
|