Hi Jake,
Sticking in a hub will make it half duplex, so full duplex rate control is out
of the question. Better get a passive tap.
Thanx,
Jaap
Jake Peavy wrote:
Hello all,
I believe we're running into an issue caused by one device sending PAUSE
frames onto the wire and impairing the bandwidth delivered by the
upstream switch.
I have placed a 10BaseT hub (old school) in the datapath and attempted
to capture this information using a linux host running Wireshark, but I
do not see any flow control information.
Is there anything I need to do to the ethernet driver/interface in order
to capture this traffic using Wireshark?
TIA,
--
-jp