Hello Jaap,
Thanks for the reply. No, I actually did ./autogen.sh and then
./configure and then make. The files are compiled to .lo, but still
the protocol is not decoded in wireshark..
I'll re-send this message to the dev mailing list, thank you for the hint.
cheers to you all,
--
--
:: Breno Jacinto ::
:: breno - at - gprt.ufpe.br ::
:: FingerPrint ::
2F15 8A61 F566 E442 8581
E3C0 EFF4 E202 74B7 7484
:: Persistir no difícil é a única maneira de torná-lo fácil algum dia. ::
2008/10/16 Jaap Keuter <jaap.keuter@xxxxxxxxx>:
> Hi,
>
> Better ask the developer list.
> In the mean time my guess is you've misted the ./autogen.sh and configure steps.
>
> Thanx,
> Jaap
>
> Breno Jacinto wrote:
>> Hello,
>>
>> I'm trying to install a dissector in wireshark. I'm following the
>> steps suggested in the install file, which says to update the
>> Makefile.common in epan/dissectors, and recompile wireshark. But it is
>> not showing in the Protocol list and traffic is not decoded yet.
>>
>> Can anyone give me a hand on this? I'm unsure it is a problem with
>> the dissector code, since it was written for Ethereal (~2006), and now
>> I'm trying it on wireshark. Was there any change in the template for
>> dissectors?
>>
>> The dissector source is attached.
>>
>> thanks in advance,
>>
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> https://wireshark.org/mailman/listinfo/wireshark-users
>