|
Hi Bill,
Before I waste any of your time looking at my captures, I'm wondering If I've set the capture up correctly. The two hosts, the DB and App server, are on a Cisco Catalyst 6509. I've SPAN'd both the DbServer and AppServer ports to the port Wireshark is on. The statistics I gave you before were from this setup. I also wanted to point out that sometimes I configured the capture with inkpkts enabled and sometimes with inkpkts disabled on the switch. Would this setup cause the excessive out-of-order warnings? Either way, what would be the best way to capture the traffic between the two hosts?
Thank you,
Michael
|