Vendor MIB file
comes to me with .mi2 extension. I can't get the MIB to load into
wireshark. I've tried various with the filename and extension with
no luck.
File name
juniAaa.mi2
Partial file -
--
*****************************************************************************
--
Juniper-AAA-MIB
--
-- Juniper Networks Enterprise MIB
--
Authentication/Authorization/Accounting MIB
--
-- Copyright (c) 1999
Redstone Communications, Inc.
-- Copyright (c) 1999, 2002 Unisphere Networks,
Inc.
-- Copyright (c) 2002, 2004 Juniper Networks, Inc.
-- All
Rights Reserved.
--
*****************************************************************************
Juniper-AAA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
IpAddress, Counter32, Unsigned32,
Gauge32
FROM
SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, RowStatus,
TruthValue
FROM
SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM
SNMPv2-CONF
juniMibs
FROM
Juniper-MIBs
JuniName, JuniInterfaceLocationType,
JuniInterfaceLocationValue,
JuniVrfGroupName
FROM
Juniper-TC
juniRouterIndex
FROM
Juniper-ROUTER-MIB
Ipv6AddressPrefix,
Ipv6AddressIfIdentifier,
Ipv6Address
FROM
IPV6-TC;
juniAaaMIB
MODULE-IDENTITY
LAST-UPDATED "200507211210Z" --
21-July-05 08:10 AM EDT
ORGANIZATION "Juniper Networks,
Inc."
CONTACT-INFO
" Juniper Networks,
Inc.
Postal: 10 Technology Park
Drive
Westford, MA
01886-3146
USA
Tel: +1 978
589 5800
Email: mib@xxxxxxxxxxx"
DESCRIPTION
"The Authentication,
Authorization and Accounting (AAA) MIB for
the
Juniper Networks
enterprise."
-- Revision History
.
.
.
.
Any ideas what I
need to modify to get it to load?