It's possible that the madwifi-ng drivers do not support the PPI
encapsulation. I would probably check with the madwifi-ng folks about that.
Can you capture packets with PPI encapsulation on the linux machine locally
(e.g. with tcpdump)?
Have a nice day
GV
----- Original Message -----
From: "Amit Vartak" <amitv20@xxxxxxxxx>
To: <wireshark-users@xxxxxxxxxxxxx>
Sent: Monday, July 07, 2008 10:49 AM
Subject: [Wireshark-users] PPI header capture through rpcap not working
Hello,
I am trying to capture IEEE 802.11n packets with PPI headers with the help
of rpcap (remote capture) method. I have installed wireshark 1.0.1 on
windows XP (this is remote desktop) and using madwifi-ng custom drivers
for capturing 802.11n packets on a linux box.
When i start remote capture, I get an error something like "192" can not
be a part of capture filter. Here the link-type is actually 192 (this is
link type in standard pcap file header) When i set link type as PRISM
header (i.e. == 119 ) the capture works very well, and wireshark
recognizes that packets contain PRISM header and decodes properly. When i
change the link type to that of PPI header, this problem is coming.
When I open some PPI header file through the same wireshark version, i am
able to see packets header properly but only while rpcap remote capture, i
am facing this kindda problem.
Does anyone have faced similar problem or have any clue why it is
happening like this?
-Amit
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
https://wireshark.org/mailman/listinfo/wireshark-users