Title: [Wireshark-users] monitor an STM-1 link
if you are using a passive tap, you should be able to maintain bidirectional connectivity on the STM-1 and the link should have come back up. Perhaps you're tap is not passive?
From: wireshark-users-bounces@xxxxxxxxxxxxx on behalf of Tam?s Varga
Sent: Mon 6/9/2008 8:25 AM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] monitor an STM-1 link
Hi Experts,
we want to monitor the traffic of an STM-1 (OC-3) link
between two Cisco LS1010 ATM switches. For this purpose,
we put an optical splitter in both forward and backward
direction that produces -26 dBm signal level on the
monitored link. The receiver sensitivity on the monitor
device is stated to be -28 dBm. The receiver link on
the monitor node does not go up (after administrative shut
down is disabled).
Questions, if someone has experience:
- is it possible to force link up even no Tx I/F connected?
- does STM-1 need to have bidirectional connectivity?
thanks,
Tamas
+---------+ +---------+
| Tx-----------------T--------(dampener)->Rx |
| LS1010 | | | LS1010 |
| Rx<--(dampener)----------T--------------Tx |
+---------+ | | +---------+
| |
v v
+-----------+
|Tx Rx Tx Rx|
| |
| Monitor |
| LS1010 |
+-----------+
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
https://wireshark.org/mailman/listinfo/wireshark-users