Hello,
First , thanks.
Second:
I am not talking about wireshark GUI, but about running tethereal from
the terminal.
Like:
tethereal -R udp port 5002
I am doing this by ssh to some machines to which I do not have access
to x-windows
So: any idea how I can configure these machines so that transport name
resolution
will not be enabled by default (when running tethereal) ?
Regards,
Ian
On Wed, May 21, 2008 at 8:10 PM, Stephen Fisher
<stephentfisher@xxxxxxxxx> wrote:
> On Wed, May 21, 2008 at 01:06:57PM +0300, Ian Brown wrote:
>
>> I am working on linux redhat Red Hat Enterprise Linux ES release 4
>> (Nahant Update 2) using wireshark-0.99.5-EL4.1.
>>
>> I had noticed that in some cases , when sniffing with ethereal, (
>> tethereal -R udp port...) I see port numbers, and in some other cases,
>> I see the protocol name. This depends on which porotocol I am using,
>
>> How can I configure my system so that I will see only port numbers (or
>> both numbers and description) when snuffing with tethereal ?
>
> Open Ethereal/Wireshark and go into Edit - Preferences then into Name
> Resolution. Uncheck Enable transport name resoution.
>
>
> Steve
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>