thanks for your answers but a real need to know the PT value a really need it
anyway can someone explain me how can i get the delay, jitter, packet loss with the RTCP capture
here is a part of my capture a found probleme to attach files
44 51.562500
161.106.176.16 10.24.1.179 RTP PT=Unknown (96), SSRC=0x2C7008, Seq=0, Time=0, Mark srvc_registry
45 51.562500
161.106.176.16 10.24.1.179 RTP PT=Unknown (97), SSRC=0x12C7008, Seq=0, Time=0 srvc_registry
46 51.796875
161.106.176.16 10.24.1.179 RTP PT=Unknown (96), SSRC=0x2C7008, Seq=1, Time=1024, Mark srvc_registry
47 52.000000
161.106.176.16 10.24.1.179 RTP PT=Unknown (97), SSRC=0x12C7008, Seq=1, Time=0 [Malformed Packet] srvc_registry
regards
2008/5/14 Anders Broman <
anders.broman@xxxxxxxxxxxx>:
Hi,
There
is no trace file attatched???
Jitter
analysis does not work well for video see bugs
And
the setup info for the RTP stream must be in the trace as well to know what the
PT is. Delay and packet loss should be possible to determine
without knowing the PT. If there is RTCP packets those helps as
well.
Regards
Anders
Sent: den 14 maj 2008 10:20
To: Community support
list for Wireshark
Subject: Re: [Wireshark-users] network analyser
that can decodempeg4streamsvia rtp? wireshark is not able to do
this.
Hi,
i mean in the column info I can see
44 51.562500 161.106.176.16
10.24.1.179
RTP PT=Unknown
(96), SSRC=0x2C7008, Seq=0, Time=0, Mark
srvc_registry and when i read the mailing list it seem to be a problem
my aim is to calculate the delay, jitter, packet lost .... when the devise
move away from the access point is there any matter with this PT=
Unknown(96)
you can find the capture attached
best regards
2008/5/13 faama ndiaye <
faamandiaye@xxxxxxxxx>:
Hi,
i
mean in the column info I can see
44 51.562500 161.106.176.16 10.24.1.179
RTP PT=Unknown (96),
SSRC=0x2C7008, Seq=0, Time=0, Mark srvc_registry
and when i read the mailing list it seem to be a problem my aim is to
calculate the delay, jitter, packet lost .... when the devise move away
from the access point is there any matter with this PT= Unknown(96)
you can
find the capture attached
best regards
2008/5/13 Anders Broman <
anders.broman@xxxxxxxxxxxx>:
Hi,
Decode in what sense? to
see fields in the MPEG4 stream? which type of MPEG4 ( Mime
type/RFC/proprietarry?) do you have a small sample trace including the setup
information ( SDP)?
Regards
Anders
hi everybody, hi Fabiana moreno
I followed all your thread
you posted in this mailing list and i am facing to the same problem i try to
capture streaming file with wireshark (i have to study the QOS of HD profile
over wireless network ) and it can't decode the MPEG4
stream.
I don't found the solution in this mailing list so can you
tell me how do your resolve this matter.
every help is welcome
--
Ndiaye Fagamou
INPT Rabat
Irfane
(00212)64319965
FTR&D issy les moulineaux
0678566930
_______________________________________________
Wireshark-users
mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
--
Ndiaye Fagamou
INPT Rabat
Irfane
(00212)64319965
FTR&D issy les moulineaux
0678566930
--
Ndiaye Fagamou
INPT Rabat Irfane
(00212)64319965
FTR&D issy les moulineaux
0678566930
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
--
Ndiaye Fagamou
INPT Rabat Irfane
(00212)64319965
FTR&D issy les moulineaux
0678566930